Somebody here mentioned a chainsaw trick a while ago for getting around a pinched bar. Remove the power head, replace the bar & chain and take another pass. I found myself in that position the other day, remembered the trick, had a spare bar and chain, and was soon back in business. It was in an awkward position to do all that (What a surprise!) but it worked.
Ounce of prevention and all that . . I never go a'sawin' without my set of 5 or 6 wood wedges. In every situation where the log is at all stressed, they get put into the kerf to prevent the "pinch." I cut them out of scrap hardwood so they won't compress but still won't hurt the chain if touched.
Concur with Mike, the wedges are very helpful, but when everything fails, I have a "Hudson Bay ax" a small axe small enough to carry easily in a backpack and can cut very accurate, when the other methods fail, the ax saves the day.
I do all 3. I have some metal wedges and about 4 dogwood wedges. Then I keep the ax handy and an extra bar and chain. Not that I've ever pinched a chainsaw of course, I just want to be prepared.
Thanks, guys. It was just another case of knowing better but not doing better. Anyway, I got some more madrone firewood out of it. Should be good by winter of 2011-12.