Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Pipe in Wood

Posts

Pipe in Wood

#1

Pipe in Wood

Jeff Rich

Has anyone run into any iron pipe while chainsawing blanks?

On one of the 4' diameter sections I was given, in the middle of the trunk was a foot long section of pipe with a junction.

Needless to say, the chain did not fair well....

After sharpening the 30" er again and doing some cutting with the 20 " er and an hour of digging it out.......

I hope this is the only metal I find in this section.

Re: Pipe in Wood

#2

Re: Pipe in Wood

Lan Brady

Jeff,

I hit a hidden horseshoe once. To say it was intense, would be an understatement.

Glad you were able to resharpen, I had to replace.

Lan

Re: Pipe in Wood

#3

Just use the right tools

Galen Vetterick

My elderly mother talked two guys into removing an old tree with about a four foot diameter trunk. When they got down to about the last 12 foot of trunk they ran into trouble with the chainsaws. She forgot to tell them that years ago the hollow trunk was filled with concrete! The last of the trunk was fell with a jack hammer. Just needed the right tool.

They held to the original price to remove!

Re: Pipe in Wood

#4

Re: Pipe in Wood

Dick Coers

I've sawn into concrete (Some teeth missing, but it was a 3' bar and still use the chain. it's really a skip tooth now), a 3/8" pipe with street elbow, square nails (now those had been in the walnut a LONG time), more nails than you can count, and one time while felling a tree, I sawed through the 1/2 metal rod that they must have tied the sapling to. It was just barely off center of a 2' tree. The local sawmill had two slabs that had pitchforks in them. You could see the top of the steel, and the points. All the rest was under the bark. Just this past month, I hit two nails on the lathe. No gouge damage, just a light sharpening to refresh the edge. Gotta love those urban trees!

Re: Pipe in Wood

#5

Re: Pipe in Wood

Terry Quiram

I have run into barbed wire, fencing wire, ceramic fence insulators and a fair share of rocks in the root sections.

Re: Pipe in Wood

#6

Re: Pipe in Wood

Barry Irby

I have a natural edge walnut bowl that came out of a tree we cut on the family farm. The tree was behind one of the tenant houses and somebody must have stapled a piece of heavy copper wire to the tree to use as a clothes line. I turned the bowl with the two wires exiting the rim about twelve inches apart and four of five inches deep. The wire comes out of the rim. There were several staples. It was like trying to turn a Weedeater.

Re: Pipe in Wood

#7

Re: Pipe in Wood

Mark Mandell - Gone Round In Jersey

Next time take your pipe cutter along :D

Re: Pipe in Wood

#8

A metal detector would be helpful.

Gil Jones

Re: Pipe in Wood

#9

Re: A metal detector would be helpful.

Jeff Rich

Yes it would...I wonder if it would detect through 2ft of maple?