Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Maple Bowl

Posts

Maple Bowl

#1

Maple Bowl

James Fox

This maple bowl was turned from a piece of a tree given to me by a friend of my wife. We got several pieces and hope to get some more. To that end, this one was a gift to him & his wife.

About 7 in. dia by 3 in. tall--a 16th-or-so thick. Another of the V-shapes that I seem to be doing lately. This piece was turned wet and warped nicely with no cracks. Several coats of wipe-on poly; then waxed and buffed.

Comments & especially Critiques are always welcome.

James

Re: Maple Bowl

#2

Beautiful!

Greg Haugen

Very elegant form and the movement is excellent. That's a beautiful bowl. Well Done!!

Greg H.

Re: Maple Bowl

#3

Re: Maple Bowl

Starry S Chan

Very nice work. This inspires to try v-shaped bowl.

I do have a question regarding sanding and finishing. I assume that you turned the bowl to its final thickness and then you waited for it to dry before sanding and finishing. Is this correct?

I have a few piece of green black acacia blanks to try this out as I plan to turn these pieces to final thickness.

Starry

Re: Maple Bowl

#4

Re: Maple Bowl

GaryG in MD

Great thinness. Love that rim. ...Gary

Re: Maple Bowl

#5

Re: Maple Bowl

James Fox

Turned and sanded (to 600) in one opereation. After it fully dried (I left it for a week to be sure), I sanded again with 600 to get rid of "fuzzies" and applied the finish.

This doesn't mean it's the only way--only the way I did it.

James