Doughnut Chuck
Nicholas Tuzzolino
I am making a donought chuck and need suggestions to line/soften the sharp edges of the holding ring and face. I know there are a few things available, but would like to hear a few success stories. Thanks!!
Knowledge You Can Build On — Est. 1998
Doughnut Chuck
Nicholas Tuzzolino
I am making a donought chuck and need suggestions to line/soften the sharp edges of the holding ring and face. I know there are a few things available, but would like to hear a few success stories. Thanks!!
Re: Doughnut Chuck
Steve Harder
Tygon tubing or surgical tubing from Lowes
Re: Doughnut Chuck
Bernie Weishapl
I use a foam drawer liner bought at walmart. It is a soft foam and works great plus leaves no marks.
Re: Doughnut Chuck
Jim Sebring
I used some of the thin tool chest drawer liner material from Harbor Freight. It's black but doesn't mark the bowl. I used the same stuff on the headstock disk the bowl top presses against to ensure a good cushion.
Re: Doughnut Chuck
Barry L Elder
Vinyl tubing from your local Aquarium Supply Store or Hardware Store.
Re: Doughnut Chuck
Nicholas Tuzzolino
Gives me great options. Thanks to all..