Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Bowl hit my shin

Posts

Bowl hit my shin

#1

Bowl hit my shin

john lucas

I took my dog hiking this morning and slipped on a slippery rock and hit my shin on a log. I mumbled a few nice words and continued on. Had a great morning. Then I was turning one of the bowl from a board bowls that I had hurriedly glued up with CA glue. It decided to come off. It spun on top of the lathe for a little bit and then fell off, bounced and hit me in the shin in exactly the same spot. A few more nice words came out followed by a spontaneous bout of break dancing and some really strange looks from the dog.

I watched these Muay Thai marshal artists toughening themselves up by kicking a tree with their shin. I wince every time I see that. I think I would have to start off kicking pillows , work my way up to the couch, then maybe a bush and then really small trees. Those guys impress me.

Oh well the epoxy is probably dry now so back to turning that bowl.

Re: Bowl hit my shin

#2

Leo Cuellar

Re: Bowl hit my shin

Leo Cuellar

I hate it when that happens! Busted my foot a couple months ago & then kept dropping hammers on it for some reason. Say John, which type of CA are you using? I'm using the Gorilla brand. Seems pretty tough but leaves a rather dark line on light wood. Is there a better brand for this?

Re: Bowl hit my shin

#3

Re: Bowl hit my shin

john lucas

Leo This was my fault not the glue. I didn't get the tenon deep enough so it only had a tiny bit of glue around the outer edge. That wasn't clear when I glued it up but was really obvious when I looked at the failure.

Re: Bowl hit my shin

#4

Re: Bowl hit my shin

Bernie Weishapl

Dang John that hurt just reading this. Wow that had to hurt.

Re: Bowl hit my shin

#5

Mike Stafford

As we get older...

Mike Stafford

I am reminded that we must stay in shape. I don't recommend kicking trees, dogs or much of anything.

Here is an exercise program upon which I have embarked that seems to be working for me.

EXERCISE FOR PEOPLE OVER 50

Begin by standing on a comfortable surface where you have plenty of room at each side.

Now with a 5 lb. potato bag in each hand, extend your arms straight out from your sides and hold them there as long as you can. Try to reach a full minute, and then relax.

Each day you'll find that you can hold this position for just a bit longer.

After a couple of weeks, move up to 10 lb. potato bags.

Then try 50 lb. potato bags and then eventually try to get to where you can lift a 100 lb. potato bag in each hand and hold your arms straight for more than a full minute. (I'm at this level.)

After you feel confident at this level, put a potato in each bag.

Re: Bowl hit my shin

#6

Re: As we get older...

Jeff Willaford

Mike, with all the lifting involved in turning some of us are not interested in doing additional lifting. For myself, I place a small block of wood in the center of the room and walk around it twice. I do this each day. If anyone asks if I exercised today I tell them "I walked around the block two times this morning."

Re: Bowl hit my shin

#7

Leo Cuellar

Re: Bowl hit my shin

Leo Cuellar

Wasn't thinking things through & decided to trim the corners off one of the blanks, (on the lathe) right next to the edge. Didn't get me, but startled the heck out of me when they hit the floor at speed :D My question is does your CA leave a dark line in the mating surfaces on light colored woods? The Gorilla does, and I was wondering if there was a CA that doesn't leave such a noticeable line? Or should I use PVA for the stacks?

Re: Bowl hit my shin

#8

Re: Bowl hit my shin

Bob Macgregor

"Oh well the epoxy is probably dry now so back to turning that bowl. "

Did you epoxy just the injured spot or both shins, just to be on the safe side? ;)

BOB