Gloat - new Kelton handle system
Jeff Willaford
TRUE collet system. No setscrews, no allen wrenches. Can't wait to put them to use. No affiliation. Just think they will be a fine handle system.

Knowledge You Can Build On — Est. 1998
Gloat - new Kelton handle system
Jeff Willaford
TRUE collet system. No setscrews, no allen wrenches. Can't wait to put them to use. No affiliation. Just think they will be a fine handle system.

Re: Excellent photos Jeff!
JamieDonaldson
Re: Excellent photos Jeff!
Dick Hines
Jeff you can pat yourself on the back. If Jamie thinks your photos are excellent you are on point. 
Re: Excellent photos Jeff!
Jeff Willaford
Was it the photos or was it the content?
Re: Excellent photos Jeff!
glenn roberts
Jeff, I beleive that Kelton only updated their web site this week to include 'Online sales' in the US for the sale of the handles. Have a look at their site for a more detailed explaination of the handles. They are available via distributors in other countries like Germany, Australia etc.
I hope this helps.
Glenn
Re: Excellent photos Jeff!
Jeff Willaford
Great design. Thanks, Glenn. I ordered these Tuesday morning right after the site went live. May not have been the first USA sale from that site but pretty close to it. They arrived today. I turned a little with them this afternoon and they are a pleasure to use.
I'll second that
Carole Valentine
I'll second Jeff's gloat. I loved this handle system so much that I ordered a second ER25. I can hand hollow pieces with these handles that I just couldn't hollow before without a rig. The two handles (ER16 and ER25) combine to create a single long handle so the set actually provides 3 different lengths of handles. An anti-torque handle screws into the side of the ER25. There is dedicated space to add weight and the anti-torque handle really gives you a super amount of control on deeper hollowing. The system uses universally available ER collets (which don't mark your tool shafts like set screws) and it comes with two collets for each handle. It's truly a no-tools-required system - hand tightening of the collet nut is sufficient. No more set screws or hex keys! Yeah! I use it with all of my unhandled tools - hollowers, gouges, drill bits, long sanding balls, etc. The covering is perfect...not mushy and not too hard and they allow me to turn with a lighter grip. I have arthritis in my hands and have been able to turn an entire day with no pain in my hands. In my opinion, these are the best handles on the market today. Good job Glenn! Wonderful design!
Thanks, Jamie!
Jeff Willaford
Re: Excellent photos Jeff!
Bill Grumbine (Kutztown PA)
Well it sure isn't content. The handles look great, but that is obviously a fake lathe in the background, since there does not appear to be a speck of wood shavings in evidence. 
Seriously, nice pictures. I have a set of these too, and they are very nice indeed.
Is this better Bill?
Jeff Willaford
Cherry bowl underway, Thompson gouge, Kelton collet handle, Robust tool rest. Life is good. See... it's not a fake lathe. 
Re: Is this better Bill?
Bill Grumbine (Kutztown PA)
Well, I see some shavings.
Much better. Jeff, if you ever see my shop, you will understand my comment. People ask if I have a dust collector, and I say, "Yeah. You're standing on it."
Re: Is this better Bill?
Jeff Willaford
Bill,
I understand what you are saying. The two pictures show almost all of my shop. I take a couple or three big bags of shavings out every day or I can't get into the shop. It's that small. I've had to shovel shavings out to get back to the floor because my back hurt from bending over.
Re: Is this better Bill?
Terry Scott
Good to see you investing in some good Kiwi gear Jeff
I can confirm that these handles are sweet to use especially when you are hollowing and changing tools constantly
joining two together sure takes the stress away from the body
maybe it is time to turn some Kiwi wood
Cheers