Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

IndyFest more demo's

Posts

IndyFest more demo's

#1

IndyFest more demo's

Ray - Middletown, IN

Al Crandall called about doing a demo with the Kobra and Jason Swanson will be along to do a demo on segmented work.

We will have the shop open about 9 or so with the demos beginning at 10 with Duane Leach leading off, followed by the Kobra demo. A break for lunch at 12 with Lyle Jamieson leading off the afternoon session. After that will be Vince Welch, Jason Swanson, Dick Coers, and ending with a discussion on selecting and cutting blanks from logs. The main demo lathe will be a Powermatic 4224 with a 4224 over in the shop as an open machine all day. In the big tent we will have a Jet 1642, a 1236, and a mini as open machines. Lyles mini and Al's mini will be setup with their respective hollowing rigs for hands on work all day.

There will be 2 or 3 8" grinders for sharpening with one setup with Don Geigers tooling on one. There will also be a Work Sharp and 1 or 2 Tormeks along with a chain saw sharpener. All the grinders will be open for Plane blades, chisels, and chains throught the day.

We will also be making specialty tools out in the tent periodically during the day.

The youth group will be setting up tents for serving and eating so there will be plenty of area under cover regardless of weather.

Friday will be setup day and when that is finished we will probably find something to turn and tall tales to spin.

September 11th, hopefully I can get the shop cleaned by then, naw, not clean but picked up maybe.

Ray

Re: IndyFest more demo's

#2

Re: IndyFest more demo's

Ray - Middletown, IN

This will be a great opportunity to compare an articulated rig to a captured rig for anyone looking for a hollowing tool.

Ray

Forgot this in the earlier post.

Re: IndyFest more demo's

#3

Steve Kubien

Re: IndyFest more demo's

Steve Kubien

Man, I really wish I could make it this year....

Re: IndyFest more demo's

#4

Re: IndyFest more demo's

Cyril Griesbach

Ray,

Once again it's shaping up to be a great event. Carol and I are looking forward to it as well as seeing you and Lynn and the rest of the IndyFest crowd.

Cyril

Re: IndyFest more demo's

#5

Re: IndyFest more demo's

Joel

This looks like a great event, I am looking at my schedules to see if I can make the trip.

Re: IndyFest more demo's

#6

Re: IndyFest more demo's

Dick Coers

Sounds really good Ray. I'm paying a couple hundred this weekend in Chicago, for just a "little more". That IndyFest is a great deal. I plan on coming over early afternoon on Friday. To make a good demo, I will have to turn something in the chuck that will be going over to the rose engine without removal. Concentricity is a big deal with getting good patterns. Should I bring over my mini to work them side by side, or should I plan on using something already there with a 1"-8 thread?

Can I bring over some blanks to sell? The shed is bustin' at the seams!

Re: IndyFest more demo's

#7

Re: IndyFest more demo's

Don at Central Illinois

Unless, the engaged couple have one heck off a fight, I'll be shooting a wedding and wishing I was at Indyfest. Looked forward to making a hook tool. If you were demoing that, maybe I could run over some weekend and have you show me how.

Re: IndyFest more demo's

#8

Re: IndyFest more demo's

Ray - Middletown, IN

Dick, there will be several lathes with 1"-8 spindles, so no need to haul an extra lathe when you could load up with blanks. I'd expect several folks to bring blanks to sell and or trade and that is not a problem. I have several skids to set wood on to make it easy to move around also.

Ray

Re: IndyFest more demo's

#9

Re: IndyFest more demo's

Ray - Middletown, IN

Don, you are welcome anytime. It's also a possibility that one may find its way west toward Illinois that weekend.

Ray

Re: IndyFest more demo's

#10

Hook Tool?

Al Kapocius

Say again what we need to provide for making hook or other tools. Need 'nuff time to, er, borrow appropriate drill rod.

Will also try to smuggle in some kringle and prolly home cured dill pickles if'n the cucumber patch doesn't dry up.

Al Kapocius

Re: IndyFest more demo's

#11

Don't tell anybody about the kringle

Ray - Middletown, IN

Let's keep it our secret.

As to drill rod, 3/8 for hook tools 1/4 for point tools. Either water or oil hardening, just make sure you know which. Water hardening tends to be a bit better behaved, but I don't see a great difference, they both have the same basic chemistry.

Ray

Re: IndyFest more demo's

#12

That will be our little secret.

Al Kapocius

Re: IndyFest more demo's

#13

Re: IndyFest more demo's

John Veerkamp

Ray,

Loml Ind I are planning on coming and looking forward to it. Can you give some suggestions on lodgings nearby. Closest town etc.

Thanks,

John

Re: IndyFest more demo's

#14

Re: IndyFest more demo's

Ray - Middletown, IN

John,

Look for exit 26 on I-69 on the south side of Anderson, IN. There are all the usual suspects for lodging. That puts you about 5 min from here. I will post exact directions closer to the 11th for everyone.

Ray

Re: IndyFest more demo's

#15

Re: Don't tell anybody about the kringle

bowlman

Kringle? Too late my friend! Salivating already ...

Re: IndyFest more demo's

#16

Re: IndyFest more demo's

Dick Coers

For the low buck stay, I have reservations at the Motel 6 #220 at Andersen. $34 for a single queen bed. Right next to a Cracker Barrel for breakfast. It's been 3 years since I stayed there, but it was nice then.

Re: IndyFest more demo's

#17

Re: IndyFest more demo's

John Lucas

Man I really wanted to come this year but we just have too much on the schedule for me to take Friday off.