Next project on the late progress report
Terry Scott
Like Jamie I dont like cutting things into the round unless I have to
This Piece of Ancient kauri is the last of 20 blocks I got out of 2 planks That were 600mm wide 2 foot 6 metres long and 4 inches thick (when are you guys going to go metric converting is a pain in the wood heap )
I paid $4.00 nz per super ft not a bad price as it was dry
I had to save the worst bit to last ,but when I opened her up the bowl ended up with some nice golden chatoyance
This is were the money I spent bring a stubby into the country was worth every cent
Fit a face plate and go for it .You can leave Kauri to long as you can see this is a bit brittle
Face off the back turn the spiggot and bowl start shaping the wings then while still on the face plate come around the back and balance and start shaping the top
I was going to bowl save a bowl but my cutters are away getting new tips on as the red mallee burl destroyed them
Just as well because I couldn't take off the small set of jaws off my Vicmarc chuck as I have rounded off the the allen screws Another mission ahead to get them out
So the jaws were only holding on by an 1/8 of an inch

A long way to go but I just posted the last photo to show I have a plan
All the carving so far has been done with the Merlin and Lancelot king Arthur If you dont own these Id suggest you dont know what you are missing



