Berger Threading Jig
Bill-Jacksonville, NC
Cost may be a problem for me, but you might want to take a look at video;
sorenberger.com
Just got my sorby thread chasers last Friday.
Knowledge You Can Build On — Est. 1998
Berger Threading Jig
Bill-Jacksonville, NC
Cost may be a problem for me, but you might want to take a look at video;
sorenberger.com
Just got my sorby thread chasers last Friday.
What is the price?
Terry Quiram
Looked at the site and didn't see any pricing. Will have to wait for someone to buy it and post to UTube so we can see how it works.
Re: Berger Threading Jig
John Lucas
I've watched it work but don't know anything about the pricing and can't compare it to the one I use. I would love to try it out.
Re: What is the price?
Ralph Lindberg
I "signed" up to pre-order last night and got an e-mail back right away from someone in sales (it was Friday AM there already)
$895
It's shown on the stamp dispenser episode of Woodturning Workshop (PBS/Create)
It's a great idea (I did find some home grown versions on-line), but pricy.
What I do like, is unlike the Klein/Best design it can be easily moved from one size lathe to another
But at that price, I'm going to have to think about it a long time.
Re: Berger Threading Jig
David Walser
I first learned of this jig back in April. Here's what I wrote back then:
Soren Berger has recently introduced a new jig that uses a substantially different design (http://sorenberger.com/). (At least, the jig is new to me. It may be old news to the rest of you.) From what I read on his website, Berger's jig is supposed to be easier to use and set up than the other jigs on the market. In addition, the jig handles a wider range of thread sizes -- as small as 5/8" to as large as 5" -- than the other jigs. Do any of you have any experience with this jig? For those of you who are just curious, you don't need to "pre-order" the jig on Berger's website to learn the price of the jig. I've done that for you. After pre-ordering, I received an email telling me the jig could be mine for just $845 -- including shipping! That's quite a bit more money than the Klein and Baxter jigs and would put the Berger jig even farther down on my gotta-have-some-day list. Question is, are the improvements worth the additional price?
I saw Tim Yoder use the jig on an episode of Woodturning Workshop that aired yesterday in our local market. The jig appears very easy to use. The cutter mounts in the lathe's headstock and the jig mounts on the tailstock's quill. The work is held in a chuck of faceplate that simply screws onto the jig. The jig has a lever that switches it back and forth for cutting the male and female threads. Very simple.
I don't know if the price I was quoted back in April is still accurate. I do note that the website now says the maximum thread diameter is 4". Unless I misread the website in April, the maximum size used to be 5". You can increase the diameter that the Klien and Baxter jigs will thread by creating an auxiliary table to slide the jig farther to the left (or towards you when you are facing the lathe). Since the Berger jig attaches to the tailstock quill, increasing the capacity would seem to require making something that the jig could attach to that is at quill height but further to the left.
It's still on my gotta-have-someday list.
Re: Berger Threading Jig
John Lucas
The new Bestwoodtools jig will do up to 4" and maybe more, I don't remember. In reality wood movement starts to become a problem for the thread sizes when you get to bigger sizes. I've only done up to 2 1/2" so far and that was a wood that move a little so the thread feels snug sometimes and loose other times. Using a wood that is more stable would probably stop that.
The Klein and Bestwoodtools jigs are quite simple to use and install on the lathe. The downside is having them adapted to your particular lathe. To speed up the job I keep the jig mounted on my mini lathe (which fortunately also has 1 1/4x8 threads) I turn the boxes on my big lathe and then thread them on the mini lathe.
The Klein and Bestwoodtools are considerably less expensive. Wivamac also had one at the AAW symposium but I think it was around the $800 and up price range.