Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Need tight grained wood source

Posts

Need tight grained wood source

#1

Need tight grained wood source

Larry_In_Lima

Was asked to make a few honey dippers, would like to find a source of tight grained wood, 6+ inches long, maybe 1.25 to 1.5 Inches square. This would be used with food, so nothing too poisonous... ;) Looked on Ebay, no luck, did a quick Google search... Anyone know of a reasonable source? Thanks.

Larry

Re: Need tight grained wood source

#2

Re: Need tight grained wood source

Joe Herrmann

Larry:

I'd suggest either maple or cherry. Both turn well both look good when finished and and both have a long association with food items. You should have no problems finding a source for the wood. Check the WoodFinders feature right at the top of the page on this forum.

Joe

Re: Need tight grained wood source

#3

Re: Need tight grained wood source

Larry_In_Lima

Joe, thanks for the tips on the species, that is helpful. The woodfinder thing doesn't really do me much good (or hasn't in the past). Problem has been trying to find the particular size (or pretty close) in small quantities.

Sure, many of them will do it if I buy so many board feet, etc.... I'm looking for a source for the particular size, in a pretty small quantity. Kind of like the pen blank suppliers that will sell half a dozen or a dozen blanks. Try to get the sawmills or lumberyards or stores listed in woodfinder to do that. I just checked it again and want to narrow it down from a generalized list....

Thought maybe someone has been buying something about this size, and could help me out with a source. Larry

Re: Need tight grained wood source

#4

Re: Need tight grained wood source *LINK*

Fred Holder

Hello Larry,

RocklerWoodworking web site lists Cherry blanks 3" square x 12" long for under $19.00 each. They list maple also, but say they are currently sold out. You should be able to get about eight honey dippers out of each piece of wood if you have the capability in your shop to saw the blocks up.


Rockler Cherry Wood Page

Re: Need tight grained wood source

#5

Re: Need tight grained wood source

Larry_In_Lima

Thanks a lot Fred, that's what I'll do!! Larry

Re: Need tight grained wood source

#6

Re: Need tight grained wood source

Ken Oakley-Sunny St. Cloud, Fla

I have both Maple and Cherry I can cut to the size You mention. Email me if you are interested. I do sell penblanks on Ebay-my username is Deltakong.

Re: Need tight grained wood source

#7

Re: Need tight grained wood source

Bill Turpin in WNC mountains

I have purchased from Ken several times. He will treat you RIGHT.

Re: Need tight grained wood source

#8

Re: Need tight grained wood source

Mark

If you do not have any luck with Rockler, try Woodcraft. Our local store has monthly specials on 1.5 by 1.5 stock in a wide variety of woods. They always seem to have maple and sycamore which would both serve your needs. Good luck

Re: Need tight grained wood source

#9

Re: Need tight grained wood source

GaryG in MD

Ken may have you covered, but, in general, eBay is loaded with inexpensive maple. For example, type

"FLATE RATE BOX OF MAPLE CRAFT WOOD TURNING BLANKS(419)" into the search box, and you'll be able to get a whole box full. A day left and no bids yet. ...Gary

Re: Need tight grained wood source

#10

Re: Need tight grained wood source

Ralph Watts

Larry,

A fine wood to use is Bradford Pear; it will take a very fine edge without chipping, no problems with food, and generally is available almost everywhere. After a good wind, limbs are always available-not because the wood is week but because of the growth pattern and low resistance to rot. Best regards, Ralph

Re: Need tight grained wood source

#11

carl

Re: Need tight grained wood source

carl

I have a lot of Beech, lots of kitchen tools were made from Beech years ago. Only thing is mine is just shy of 1 1/4" thick. But is heavy and tight grained. I just brought a board up from the shed, it been down there for 15 years. If you want some, i could cut up some for you and let you have some cheap if you pay shipping. If you need thicker you can glue up and you never know, the grain is that close. Carl

Re: Need tight grained wood source

#12

Re: Need tight grained wood source

Janet Bequeaith

Carl, How do I contact you? I need some light wood for some segmenting work. The Beech that I am familiar with is a cream color and would work very well. Not real familiar with this site and how to contact. Thank you, Janet

Re: Need tight grained wood source

#13

Re: Need tight grained wood source

Larry_In_Lima

Thanks everyone, Ken hooked me up REAL good. Can't say thanks enough. Beautiful wood, all A+. thanks again Ken. Larry

Re: Need tight grained wood source

#15

carl

Re: Need tight grained wood source

carl

Hi sorry i didn`t catch your post sooner. You can contact from email at top of post. Carl