Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

What did you learn this week?

Posts

What did you learn this week?

#1

What did you learn this week?

Mike Jones in Redding, Ca.

(1)I learned never hold the workpiece in one hand while pouring CA into cracks with the other.

Ya never know where that stuff might come out.

(2) I learned never to use CA without having some de-bonder nearby.

(3) I learned a little bit about woodturner's politics.

What did you learn?

Re: What did you learn this week?

#2

Re: What did you learn this week?

fgvanatta

(1) I learned that CA always comes out between your hand and the wood.

(2) I learned that I go through a bottle of debonder so fast that I need to keep at least two around at all times.

(3) I learned that I hate politics of any kind. No, Wait! I already knew that. Well, two out of three ain't bad.

(4) Actually, I also learned that thick CA will zip through a crack and onto your hand just as fast as the thin will.

(5) I learned that when chucking using the Blue Tape and Hot Glue method not to rely too much on the tape.

Frank

Re: What did you learn this week?

#3

Re: What did you learn this week?

GaryG in MD

After several similar experiences, I have made it an iron-clad rule for myself that no matter how apparently safe and simple the application is expected to be, I will not open a bottle of CA, under any circumstances, without first putting on a pair of blue nitrile gloves. This rule has saved me more than once from nasty surprises. I also make it a rule to always work over a thick newspaper. That's what they're for, isn't it? Gluing a blank to the workbench is such a PITA. ;-) ...Gary

Re: What did you learn this week?

#4

Re: But Gary, scraping off the newspaper ....

JamieDonaldson

...glued to the bench ain't not easy job either! ;)

Re: What did you learn this week?

#5

;-)

GaryG in MD

That's why I said "thick newspaper" -- i.e., many pages -- DAMHIK!

A good rule of thumb is: If you're squeezing in more CA than the crack is big, it's coming out somewhere!!! I try to dam up the sides with "medium" or "thick" before I start hitting it with "thin" -- generally works pretty well.

The real problem with that stuff is the well-recognized but often ignored toxicity. I hate to think how many brain cells I've killed working without proper ventillation. (Does holding my breath count?) ...Gary

Re: What did you learn this week?

#6

Barb Siddiqui

I learned

Barb Siddiqui

that Alaskan Yellow Cedar is not an ideal wood for turning. Struggle, struggle....

Re: What did you learn this week?

#7

Steve Kubien

Re: What did you learn this week?

Steve Kubien

I learned that...

1) Summer vacation for the kidlettes means little turning time for a stay-at-home dad,

2) Aforementioned turning time gets relegated to evenings and into the wee hours of the morning,

3) SWMBO gets woken up no matter how quiet I am getting into bed so that...

4) Turning time gets even more limited.

5) That means more time to read forums on the internet which further means the I too learn...

6) I hate politics.

Re: What did you learn this week?

#8

Re: What did you learn this week?That I need

Terry Scott

Isnt it odd/a shame how we have made ca an essential part of our kit

I still use it but know I shouldn't as 20mins latter on the dot I start sneezing and have a sinus attack like you wouldn't believe.

Tried the non fuming smelling stuff but it wont stick squat

So what have I learn t this week and the week before and the week before is I shouldn't even go near the stuff

Or that you dont take the lid off with your teeth

Re: What did you learn this week?

#9

Re: What did you learn this week?

john lucas

Carving dry maple is slow. With really sharp tools it isn't that hard but you sure can't take anything more than a sliver off without risk of slipping.

I learned that I can rough out a mirror blank and dry it in the microwave. I've always worked with dry wood for my mirrors up until now. The blanks only went out of round by 1/8" (maple). The cupping could be a problem if you leave them square and want thicker sides. I'll have to experiment more with other woods.

It's impossible to travel with CA and not have the lid stick on. I think I've tried everything. I wonder if spraying the lid with a light layer of WD-40 would work without killing the glue. I'll get another chance to find out in September when I go to the tri-state woodturners.

I learned that switching to a 1 micron bag and adding a garbage can seperator reduces your suction a tremendous amount. When I move the dust collector to the new addition (if I ever get the money to build it) I will do away with both. I'll just make the bottom bag easier to remove to empty and put an additional filter going from the building return back into the shop.

I learned I have to move the lathe. It's new position is just not working. I can't clean around it easily enough.

I learned I have a lot more to learn.

Re: What did you learn this week?

#10

Re: What did you learn this week?

Matt Overton

I learned patience in the woods with 14 adolescent boys for a week.

I learned to carve a little bit better.

I learned that politics are for politicians, not woodturners.

I was reminded again what great insight you guys(and gals) that turn wood have.

Re: What did you learn this week?

#11

I keep Re-Learning.....

Jennifer Indy.USA

.....don't practice a new technique on something that you intend to be a keeper! practice on a scrap piece!

When will I ever learn?

Jen :\

Re: What did you learn this week?

#12

Re: What did you learn this week?

Harry in Beautiful Downtown Kulpsville

Today I learned that on some days one should stay far away from tools and lathes. I've been making a different Christmas tree ornament for my kids, relatives and friends for six or seven years. I got an early start this year and have been making ornaments similar to the ones Bob Rosand has popularized.

I've finished six or eight so far with no problems. So, today I got some sort of a catch on an icicle, pulled it right out of the chuck. It flew across the lathe and banged in the tailstock. Smashed it beyond repair.

I had the wood cut for a couple of the spheres. Had made the shape on the outside of the first one and started hollowing it. Got another catch inside the darn thing and it broke into several pieces.

At this point I finally realized it was not my day. Cleaned up the shop and turned on the television.

Re: What did you learn this week?

#13

Re: What did you learn this week?

Carole Valentine

When something doesn't work, hit it with a hammer. You either fix it or have a good excuse to buy a new one. :\

Re: What did you learn this week?

#14

Mike Stafford

I learned...

Mike Stafford

...a few more reasons why I am getting closer to retirement. (I was eligible almost 5 years ago.) Most of them have something to do with fatigue.

...that even though young women bring a different perspective to the job compared to old men they also bring active wombs (i.e. they get pregnant and take maternity leave; old men never took time off to have a baby..... :b )

...lacquer, even when thinned, dries in a nanosecond when it is over 95 degrees. I actually think it dries before you can get it on the wood.

...that it costs $78 to ship a 14 pound ride on dump truck to my grandson in Japan.

...that I am feeling very lonely knowing my family is so far away.