Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

American Association of Woodturners

Posts

American Association of Woodturners

#1

American Association of Woodturners

Jim Rutten

I had basically stopped posting on this subject since it seems both sides have been fleshed out and I have nothing new to add on that front. Something occured to me as I was reading others' posts. Has the AAW outgrown it's current leadership model? It seems as big as we are that it is an awful lot to do for 9 board members and an executive director. Am I off base?

Re: American Association of Woodturners

#2

Re: That's a very valid question....

JamieDonaldson

..., and probably the best answer should come from past or present Board members once we get past this current crisis of leadership.

Re: American Association of Woodturners

#3

Re: American Association of Woodturners

Malcolm Tibbetts

Jim, to answer your question, as least from prospective� The basic structure has not been out-grown. In addition to those positions that you mention, there is an office manger and a few full-time and part-time employees. The ED position is more than a 40-hour/week job, but the board responsibilities, while being substantial, are not over-whelming (most of the time).

Re: American Association of Woodturners

#4

Re: American Association of Woodturners

Kurt Rosenzweig

And the decline begins

Re: American Association of Woodturners

#5

Re: American Association of Woodturners

Brian George

Malcolm,

On an earlier post I suggested that the 325 clubs be organized into regions. Would more than nine regions, therefore more than nine directors, be cumbersome?

Re: American Association of Woodturners

#6

Rob Wallace

Re: American Association of Woodturners

Rob Wallace

At the members meeting at the Albuquerque Symposium last year, I suggested that each director be responsible for a particular region of the country to attempt to improve communications between chapters and the board. I'm not sure how far the suggestion got, but several BoD members said it was an idea worth pursuing if logistics could be worked out.

Rob Wallace

Re: American Association of Woodturners

#7

Betty Scarpino

Re: American Association of Woodturners

Betty Scarpino

There is also interest on the BoD to consider expertise-specific positions for board members. For instance, it's important to have someone knowledgeable about finances. Someone who understands websites and the Internet, someone who is a good communicator (not to be confused with PR), someone who is an effective, deliberative leader, representatives of all aspects of woodturning. Probably other areas, too. This would assume that all of the above understand that the AAW should encompass all aspects of turning, beginner, intermediate, advanced, segmented, production, businesses who sell woodturning supplies, basic bowls, penturning, OT, and yes, even artsy-fartsy.

Perhaps regional BoD representation, but other considerations are equally important. To just have regional representation does not necessarily mean that the board would be such that it would be effective in moving the AAW forward. The AAW needs board members with vision, an even-handed approach, and good communication skills (which means listening to the members they represent).

Re: American Association of Woodturners

#8

Re: American Association of Woodturners

Bill Clark

Sounds like to me you're right on target Betty. AAW needs better representation of all levels and types of woodturning. That's one of the main complaints I hear at the three different club meetings I attend.

Re: American Association of Woodturners

#9

SUPERMAN

bob davis

Re: American Association of Woodturners

#10

Re: American Association of Woodturners

Malcolm Tibbetts

Betty, given your strong support of the current board and their recent action, I find your description, and I quote, "The AAW needs board members with vision, an even-handed approach, and good communication skills�.�, unquote, to be less than sincere. Where were those traits during the termination action perpetrated towards Mary?

Re: American Association of Woodturners

#11

Re: American Association of Woodturners

David Walser

Malcolm,

In fairness to Betty, isn't it possible to support X while at the same time calling for improvements in X? At least, I believe my wife supports me, but that hasn't prevented her from making (frequent and mostly accurate) suggestions on how I can become a better man, husband, and father.

I read Betty's post as being a counter to the calls for regional representation on the AAW's board. She was merely pointing out that such a structure might not address the need for the board to be made up of people with diverse backgrounds and skill sets. I thought it said exactly zero about whether the current board meets the aspirations she outlined and said even less about whether the current board handled Mary's termination properly.

Re: American Association of Woodturners

#12

Betty Scarpino

Re: American Association of Woodturners

Betty Scarpino

Thank you, David, that is how my message was intended to read. When composing it originally, I almost added, "like the current board members," however, I decided not to repeat what I've already stated, which I felt would invite a negative reply.

There are many AAW members who have the wisdom to lead effectively. I hope some of them step forward to run for the board in next year's election.

Re: American Association of Woodturners

#13

Re: American Association of Woodturners

Malcolm Tibbetts

David, it�s no secret that Betty has been a strong supporter of the board and their recent action -not only with her various internet forum postings, but with her personal phone calls. Considering the current board�s behavior, I found her use of the words, �an even-handed approach, and good communication skills�, amusing when describing board member attributes.

Re: American Association of Woodturners

#14

Re: American Association of Woodturners

Charles Watson

David, that's the way I read it as well.

Re: American Association of Woodturners

#15

Re: American Association of Woodturners

Buddy Riley

come on, everyone knows Betty has an ax to grind with Mary, has for ..what last 2 or 3 years, pushed Carl Voss out, (I will give her props on the job she has done with the Journal), worry about the symbol on the Journal, everyone is tired of hearing ,"Let the BOD do what is best", best for what, them, the little group that backs them (BOD) all of the little emails and phone calls out, nice job that marketing firm they hired has done. I am betting they didn't expect the uproar to last this long and have this much effect. Sign me up for the 5% group.