Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Hat #2

Posts

Hat #2

#1

Steven Antonucci

Hat #2

steven antonucci

ok, it is certainly not that difficult to turn these 'forms', but making a wearable hat is not something you just wing...

This is my second hat, and while it is quite a bit thinner, it still feels kind of stiff to bend. Frankly, I am afraid that it may be a little too dry from sitting around too long.

It is the other half of the log from the first hat. it had some odd pit running through it, and I bet that picking your log is a great first step in hat making. I just grabbed what I had.


Much lighter, but you'd have to have an ENORMOUS head to wear it. I know that because I sized this one for my own enormous head, and it is too big for me. By a longshot. I would say that it is very similar to putting a wooden bucket on my head.

Stay tuned. Sooner or later, I'll make one that fits people...

s

Re: Hat #2

#2

A Design Opportunity

Mark Mandell - Gone Round In Jersey

Up for a bit of carving (or are you committed to the "no augmentation" crowd)?

Get out the the burrs. Get a couple of measurements.

You've now got a commercial operation as all you need are a pair of ear holes for Mr. Ed and these will be the new rage for, . . (here it comes) . . . the Carriage Trade!

You've got New York and Philly with easy driving distance, and there won't be a street-horse without and original Antonucci. Who needs a job!? Go for it?

Phase 2 will be cows,

Then get out the small tools 'cause parakeets and parrots are next.

[God, I love when a plan comes together!!!]

Re: Hat #2

#3

Steven Antonucci

And I'll turn a buggy whip too!

steven antonucci

Gotta sell the accessories...

Re: Hat #2

#4

Re: And I'll turn a buggy whip too!

Brian George

I'll turn some 12" boots, because it sure is getting deep here...

Re: Hat #2

#5

Better

Mark Mandell - Gone Round In Jersey

Make'em waders. You ain't seen nuthin yet

Re: Hat #2

#6

Steven Antonucci

Three centers and an elliptical attachment

steven antonucci

maybe some turned horsehoes too (I think you could do it, given a lot of time on your hands and/or a complete lack of friends)

turn a u shaped hollowform, leaving it about 1" wall thickness

Then, mount that form to a backer plate. Go ahead and screw through the side wall. We'll turn it away in a minute anyhow. Now turn the wall down across the face to reveal the "bottom of the shoe"

Unscrew the 'half vessel' and turn it around. some white glue and a paper joint might do it. Turn away the other half of the vessel until it is 'horseshoe" in thickness. If you really have nothing better to do, turn it offset so you can raise the two little tips at the back of the shoe.

Then, finally, if you have absolutely no life outside of the lathe, remount it and turn all of the nail holes around the shoe... i think there are 3-4 each side?

or you could take up blacksmithing :)

S

Re: Hat #2

#7

Re: Hat #2

Jerry Whitaker

Looks like it has an applied camo pattern