Be careful what you ask for. One of our club members asked a favor of me to cut some thick wood for him and plane it down. told him I would do it. He asked if I needed any wood. I told him I was teaching a couple of students later in the month and needed some bowl blanks. Possibly some maple. Here's what showed up in my yard. 36" logs. Now bear in mind that I only have a 20" bar on my chainsaw. I started cutting the top log. Near as I can tell I have about 2" in the middle so I'm headed to the saw shop to see if I can get a 22 or 24" bar.
I do not need that much wood. No way. If anyone is in the area and needs some wood give me a call. Top log is 36" at the fat end. Bottom right log is about 28" I haven't cut into yet to see anything about the color. I don't think it has any special features.
The bar is 20" but the cutting area is only about 17. My good friend who makes giant rocking horses has a saw with a 5 foot bar. Maybe I'll talk him out of that.
Although I know it violates all basic tool acquisition instincts and unwritten tool etiquette guidelines, perhaps asking for help from the big saw's owner to chunk-up this log pile into manageable pieces would be a better strategy (?). Unless, of course, you get a great deal on the saw, and you justify its purchase by 'paying for' the free wood with the cost of the saw (....which is what I would do!).
I had similar situation a few years back, my 18" bar cutting from all sides left about 4" uncut at the middle, no problem, an old cross cut hand saw did quick work of it