Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

AWA 2010 Symposium

Posts

AWA 2010 Symposium

#1

AWA 2010 Symposium

George Guadiane

I got to SEE Ellis Walentine, but didn't exactly get to speak with him.

Other than a few failings like that and the camera operators on some of the demonstrations, this was an INCREDIBLE experience and I'm already plotting and planning on how to get to the next one.

Woodturning is such a great source of comradery and information exchange. And the people I meet just keep reinforcing that.

The work I saw was by and large stunning with many pieces that made me hurt with joy at getting to see them up close...

As much as I love looking at images of the beautiful stuff that you guys do, I have to say that I was surprised to find that many/most of the pieces I recognized looked even better in person.

And the rest of you? What was your experience like?

Re: AWA 2010 Symposium

#2

Steven Antonucci

drinking from a firehose...

Steven Antonucci

I don't think I ever realized how high the bar has gotten. Seeing the work up close and personally made me realize that the game is getting much stronger, so I must get much stronger...

I honestly think that the opportunities are overwhelming. Depending upon where you are in the hobby/lifestyle, you almost need to have a game plan to get everything done. It would be very hard to see it all, and even moreso if you wanted any depth. Some of my best time spent was completely unplanned, but will be added to the next plan.

And god forbid you hang out here... the opportunities to meet people you "know" are truly staggering.

Steve

P.S. I saw you, but with your bluetooth in your ear, I couldn't tell if you were on the phone. I turned my phone to vibrate and called people back (if I felt like it :) )

Re: AWA 2010 Symposium

#3

Re: drinking from a firehose...

Don Orr

Or more like being swept away by a Tsunami. I had never been to a national show like this. I have been impressed with smaller regional shows but this is the bigtime. Met a lot of people. Saw some great demos. Saw a lot of wonderful turnings. Bought a few things. Had a great time. Still staggering with all the possibilities.

Next year is unlikely for me but you never know. Glad I at least got to do it once.

Re: AWA 2010 Symposium

#4

Awsome

john lucas

Just got back, trying to get some lunch before I go into work. I'll unpack tonight. I met so many people I can't even begin to tell you all the names. It was great. I did get to spend some good time with Steve, Don and Ellis and quite a few more.

Probably the best thing about the AAW symposium is just getting to see friends that you have met at the other symposiums and catching up their lives.

I only saw 2 demos because I simply had to many things to do. Sharon Daughty was great even though she couldn't turn because of an ankle injury. Ed Kelle gave a great demo on texturing ,carving and painting.

I worked all day for Bruce Hoover at the Sanding Glove because he had in injured helper. That was good because I did get to talk to a lot of people but it meant that I couldn't go to any demo's.

I told myself I wasn't going to buy anything. Well of course that doesn't work. I ended up buying a 5" set of jaws for my vicmarc chuck and while she was writing up the bill I told her to just add a chuck to it. I've been wanting another one anyway and that was a good price.

Well I've got to run off to work. I'll go through my notes and give you some tips on what I picked up. Oh, if they have any more copies of the demonstrator handout book you should buy one. The notes and information in that publication are great. You can probably find out by going to the AAW web page but I'll have to go there myself and look.

Re: AWA 2010 Symposium

#5

Spence

Re: drinking from a firehose...

Spence

Steve, Drinking from a firehose is one of the best descriptions I've heard yet. My head is still spinning (Pun intended lol) and I have filled about half the pages in my "idea" book. With out a doubt the bar has been raised and my gameplan has hopefully taken a radical change. Being able to see these pieces up close was great but I wish I could have handled them too. Well some anyway. I'd be scared to death to pick up one of Cindy Drozda's or Bin Poh's pieces. lol Simply amazing!! Don't know how I'll pull it off but I'm going to try to make it to next years symposium and any other relatively close by gatherings....

Re: AWA 2010 Symposium

#6

Re: drinking from a firehose...

Matt Overton

You nailed it. What do I do first? I came away with so many challenges. There's the Vicki Jordon's tree project. John sent me some great pieces for making some jewelry just before the Symposium. Then there is the challenge to finally be able to use the skew like Alan Lacer. I came home with one of his skews...no excuse. I had a great conversation with Mark Baker the editor of Woodturning Magazine. He asked for critique of the mag. so I gave it to him. He then challenged me to send him some pictures and ideas that he may use. Then there was the conversation with Nick Cook about how the Boy Scouts really should bring back the Woodturning Meritbadge. As a Scoutmaster, I have felt strongly about this for a long time, and will try to spearhead this in PA. I was also challenged by a few members of Bucks Woodturners (my local chapter) as to why they haven't seen me at meetings. This is the night our Boy Scout Troop meets and I have never been able to get there. I announced at last night'smeeting that I can not meet on Mondays anymore. I need to address all these challenges, because turning is just that damn important to me. OKay, it was a good Symposium.

Re: AWA 2010 Symposium

#7

Don Geiger

Re: Awsome

Don Geiger

Hi John:

It was good to see you again. Your mirrors are incredible. Could you send me a couple of photos (to my e-mail address) of the carrot mirror? How much are you asking for it?

Thanks for helping Bruce out. Ernie has a serious problem and could not be there. Brother Bruce was in a bind. Thankfully you and some other's pitched in to help. MANY MANY THANKS!!!!!!

I sold a lot of wheel truing and dressing solutions- probably due to the good words that have been published by you and other users on WC and Sawmill.

Don Geiger

dongeiger@cox.net