Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Fun turning on a monster lathe

Posts

Fun turning on a monster lathe

#1

Fun turning on a monster lathe

Mike Foster

I had a local jack-of-all-trades, George Dunnett, stop by recently and ask me if I would like to turn some columns for a town gazebo he is rebuilding. I mention to him that my lathe has about a 4 ft capacity, and he said, no problem, I have the lathe if you will do the turning. Well he really piqued my interest, so I had to say yes, even though I don't really do spindle/architectural turning. Just to give a whirl on such a lathe had me going. These columns wanted to be 10 ft long, so I could just imagine the lathe. Turns out the lathe is a Wadkins that could easily handle the 10 ft length. This lathe had no sliding headstock, but a sliding bed (actually a geared bed) that opens up to expose a gap bed that would turn anything about 6 ft in diameter (I'm guessing on that as I didn't measure the swing. The lathe is powered by a 3 horse 440v 3ph motor and had a geared mechanism that provides speeds from about 60 to 1200 RPM. The chuck that I used is not a scroll chuck, so it takes a little fiddling to get the blank centered. This guy is one serious collector of tools that puts me to shame. He has 2 more comparable lathes, 2 48" planers, 1 20" jointer, a couple monster bandsaws...... These are just a few of the shop full of wonderful tools this guy has. All of the tools are of the "good old variety" Ie.. old, but will never die.

George also happens to dabble in buying and selling figured wood (like birdseye and curly maple, curly cherry....) so you can guess what I asked in return for my services. We haven't gotten that far yet, but I'm sure I will be happy with the result. We spent a good part of the morning just yacking, and I had to figure out all the little details with the lathe (as he just turned me loose and went to work on the gazebo), so this first column took the morning. I need to turn 3 more replacements for him and am going to try to get them done tomorrow.

I don't really have the right kind of shop for a lathe like this, but it sure would be fun. No need for sand bags.


Re: Fun turning on a monster lathe

#2

Re: Fun turning on a monster lathe

Texian

Great post Mike. Looks like you did a fine job replicating that original column.

Re: Fun turning on a monster lathe

#3

Dude- I want that lathe.   

john lucas

Re: Fun turning on a monster lathe

#4

Re: Dude- I want that lathe. 

Terry Scott

You cannot have it sorry my name is on it

Thanks for posting

Re: Fun turning on a monster lathe

#5

Re: Fun turning on a monster lathe

Carole Valentine

Wow...what a monster! Is that tail stock moved manually? Looks like it would weigh about 300 lbs by itself! What's the top speed?

Good job on the post!

Re: Fun turning on a monster lathe

#6

Re: Fun turning on a monster lathe

Mike Brazeau

Now that is one project to put some photos of in the family scrapbook. Nice work. I enjoy spindle projects for the challenge and that is a memorable one.

Re: Fun turning on a monster lathe

#7

Re: Knowing your exceptional attention...

JamieDonaldson

...to detail on a much smaller scale, this must have been a "monumental" experience Mike!

Re: Fun turning on a monster lathe

#8

Roger in MO

Re: Fun turning on a monster lathe

Roger in MO

That's a fine piece of work Mike. Looking at the lathe brought back memories. In the early 1960's I spent two summers workiing in a machine job shop. We had a similiar lathe used to turn journals for bearings and sprockets on 3 to 4 inch shafts up to 10 or 12 ft long. The bed sagged when extended so we used a hydraulic jack to support the tailstock end. We used a steady rest instead of a tailstock. Thanks for posting. I hadn't thought about that lathe in a long time.

Roger

Re: Fun turning on a monster lathe

#9

Dang!

Jennifer Indy.USA

That's a cool looking old lathe.

Nice job on the duplication too!

Jen

Re: Fun turning on a monster lathe

#10

Re: Fun turning on a monster lathe

Mike Foster

Here are pics of the results. The posts are 10 feet long so that they will go through the deck and rest on sono tubes under the gazebo. I'm not sure why he only wanted to replace 4. The posts shown in the gazebo picture actually rest on the deck. George wants to stiffen up the whole structure by adding the 4 columns that actually pierce the foundation and rest on the foundation. He has been working the past week or so, to redo the roof and some of the other elements. George originally built the gazebo 30 years ago, and the town asked him to do the repairs. A fun project to help beautify one our neighboring towns.

Carole I looked at the speeds again and they range from 98 to 1948 RPM's. The speeds probably just worked out that way due to the gearing in the transmission. The swing is indeed 6 feet and that tailstock has to be a couple hundred pounds. I didn't even think about trying to pick it up to see. It does move pretty well as the ways are oiled. Takes a whole body shove.

Re: Fun turning on a monster lathe

#11

That's really cool Mike- good job

john lucas

Re: Fun turning on a monster lathe

#12

Re: Fun turning on a monster lathe

Bill Hale The Wood Spinner

I can't believe you could do those without a couple of steadys. Great job.

Re: Fun turning on a monster lathe

#13

Re: Fun turning on a monster lathe

Mike Foster

They were glued up laminations which helped stiffen them, I think. One of the four was slightly problematic because it did whip some, and every time I would start the lathe, the whip was slightly different, so getting good smooth cuts was really challenging, even more so because it was pine. An 80 grit gouge cleaned it up nicely though :).

Mike