Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Sand Like The Sandpaper Was Free

Posts

Sand Like The Sandpaper Was Free

#1

Sand Like The Sandpaper Was Free

charlie belden

When a turning club member noted for his flawless finished surfaces was asked his secret his response was "Sand like the sandpaper is free.".

Think about the last piece you sanded.

Could you tell when the sandpaper was becoming "loaded up" or had dulled? If you did, did you continue using it - "just a little bit more" - or until it was just heating up the piece - to get that last little bit of use out of it?

If you did, did you notice little surface cracks or shiny streaks on the "sanded surface" - where, rather than sanding, the paper - and maybe stuff packed on it - compressed the wood rather than removing it - or heated it up and it cracked?

It's SO easy to just press harder and longer in order to not "waste" paper. A great example of "Penny Wise, Pound Foolish".

So to add to

Dance Like No One's watching

Sing Like No One's Listening

add

Sand Like The Paper's Free

Re: Sand Like The Sandpaper Was Free

#2

Steven Antonucci

If I had a nickel for each piece of spent paper...

steven antonucci

in the shop, I jingle when I walk for sure...

Use sandpaper like it wasn't your shop and you didn't know the guy who bought it...or didn't like him! I am guilty of stretching my paper for stuff that I don't really care about and prototypes... but I use new paper on serious work.

Also, SUPER IMPORTANT to buy good paper! That cheap brown pack of garbage that they sell at the BORG isn't anything more than rocks glued to caardboard...

Steve

Re: Sand Like The Sandpaper Was Free

#3

Mike Stafford

I use sandpaper like Charlie is paying for it...

Mike Stafford

:b

Re: Sand Like The Sandpaper Was Free

#4

Re: I use sandpaper like Charlie is paying for it.

John Jordan

I agree, Charlie. There was an article in Woodturning Magazine some years back about washing your sandpaper-maybe a Scotsman? :) I had the urge to fly over and beat him to a pulp. Really.

John

Re: Sand Like The Sandpaper Was Free

#5

Re: Sand Like The Sandpaper Was Free

Bill Neddow

Boy, Charlie, do you have that right.

Almost everyone over-uses sandpaper, pushing harder when it gets dull, creating heat and cracking, and shoving those dull rocks down into the wood to form Grand Canyons that have to be sanded out with the next grit.

Also, as Steve says, buy really good sandpaper. There are a number of sandpaper standards out there you should be aware of. The two most common for us are the CAMI (North American) system and the FEPA (European) system. The CAMI standard works by averaging the range of grit on a disk. That means that 80 grit could easily have some 36 grit in it -- it is the average that counts. Getting scratches out with this stuff is next to impossible because of the dramatically coarser grits on each disk. With the FEPA system, the grain sizes must be within a certain range. For example, a 240 grit disk might have some 220 in it along with some 260. But you won't get bits of gravel stuck in the 360 grit. You can recognize the FEPA paper by the "P" put in front of the number (e.g. P180).

Even when you are using FEPA paper, spending more is advisable. The sandpaper industry is exceedingly competitive, and the manufacturers use that extra bit of money you are spending to reduce the range of grits so that with the really good stuff, you are getting very close to having a consistent grit size on the disk.

I learned the hard way not to buy the cheap stuff. For a number of years, I did production turning and was spending over a $1000 a year on sandpaper. I finally started buying the good stuff . My bill went down to $700 a year and I spent a lot less time sanding and re-sanding to get the scratches out.

Re: Sand Like The Sandpaper Was Free

#6

Same is true with sharpening tools

john lucas

I've mentioned this before but viewing my tools as consumables like sandpaper let me sharpen more often without the guilt of using up the tool. Sharpening more often of course improved my turning and made it more pleasurable but it also taught me how to sharpen. As my sharpening skills improved I removed less and less metal from the tool. Consequently the tools last longer. It was a win win situation.

Re: Sand Like The Sandpaper Was Free

#7

Re: Same is true with sharpening tools

Bill Neddow

Very true, John. Something else I have found out -- with the new powdered metal tools like the ones Doug Thompson sells, it is possible to use a much finer edge than you can with M2 steel. I have started sharpening with a 180 grit wheel. You can't really do that with an M2 tool because the very fine edge will crumble. The new tool steels are tougher and will hold the almost-scary edge. Make sure you take the burr off the newly sharpened tool with a quick swipe of a diamond hone down the flute. This edge will now last longer than an 80 grit edge on an M2 tool. And, each time you sharpen, you are taking off less metal.

There is another benefit. You are transferring 180 grit scratches from the tool onto my bowl, not 80 grit scratches. That means you can skip a couple of grits of sandpaper, unless, of course, you have tear-out.

Re: Sand Like The Sandpaper Was Free

#8

Re: almost  free

bill crommett

The last time I was In Hickory I bought 14 pounds of gold stuff from Klingspoors mill ends bin. I have two milk cases of sandpaper and a bunch of other fuzzy stuff on the roller bar. The widow will have no problem giving that stuff away.

Re: Sand Like The Sandpaper Was Free

#9

Use Sandpaper Like You Use - Toilet Paper?

charlie belden

AbraNet? I'll soak the gunk off - a few times.

Sandpaper? I might try the wash it off.

Toilet paper? I draw the line at using both sides.

Washing toilet paper? Definiitely not. Wrinkles horribly as it dries - and is very difficult to press flat . . . I'm told.

Re: Sand Like The Sandpaper Was Free

#10

Re: Sand Like The Sandpaper Was Free

robo hippy

On the newer abrasive discs, the grit is put on electrostatically, which makes for much more even grit on your discs. Much better than the screened abrasives.

One thing I have noticed about Vince's discs, and some of the ceramic ones, they can feel dull to the fingers, but still cut great. I have to judge by how much dust is coming off, and if the marks are going away. That gets harder to do with the 320 and above grits though.

I never did understand the idea that an 80 grit wheel would leave 80 grit scratches in the wood. If that were so, I could never start sanding at 120, 180, or even 220, which I do frequently. Maybe it is because finish cuts are at a shear angle, and that would lower the gaps, kind of like looking at a comb straight on, or at a 45 degree angle (thanks to Michael Mouse for that explanation). Another explanation is like going over a speed bump. If you go over it straight on, it is abrupt, but if you go over it at a 45 degree angle, it is a lot smoother/flatter curve.

robo hippy

Re: Sand Like The Sandpaper Was Free

#11

Steven Antonucci

Use sandpaper like my 4 year old uses TP

steven antonucci

An entire 8"x11" sheet to sand a finial, then jam the whole thing in the headstock and call daddy to tell him that there's something wrong with the lathe...

Oh, yeah... I have twin 4 year olds too.

S

Re: Sand Like The Sandpaper Was Free

#12

now that's funny I don't care who you are 

John Lucas

Re: Sand Like The Sandpaper Was Free

#13

Re: Use Sandpaper Like You Use - Toilet Paper?

charlie belden

Should have specified "Like GUYS Use Toilet Paper".

The current batch of neighborhood "adoptees" are all girls. While they don't eat you out of house and home, like boys do, we're going through a LOT more TP - and paper towels. They'll roll off a couple of yards - to dab off an invisible amount of stray eyeliner, half a roll of paper towels to wipe up two drops of water from a counter top. I can only imagine what the sandpaper bill would be like if they renewed their interest in woodworking ; )

Re: Sand Like The Sandpaper Was Free

#14

Mike Stafford

Teach 'em to use one sheet...

Mike Stafford

like they do in the military.... :b ;)

Re: Sand Like The Sandpaper Was Free

#15

Opinions on Klingspor sandpaper?

Opelika Edro

I have entertained the idea of buying one of the Klingspor bargain packs -- and I see that Klingspor is one of Ellis' advertisers. Any recommendations? What packs have you purchased and used?

Re: Sand Like The Sandpaper Was Free

#16

Re: Opinions on Klingspor sandpaper?

bill crommett

I have been disappointed with the Klingspore bargain boxes, but I am well satisfied with the K-- Gold paper. The only thing I have purchased out of the catalog in some time is a series of velcro backed paper that I cut up to make disks for the drill .

Re: Sand Like The Sandpaper Was Free

#17

Re: Teach 'em to use one sheet...

charlie belden

Half a roll of TP is bad enough. Now you're suggesting they start using my sheets?!

Re: Sand Like The Sandpaper Was Free

#18

Chuck Jones - West TN

Re: Teach 'em to use one sheet...

Chuck Jones - West TN

Mike I would guess less than half understand your one sheet reference. Too bad there is no practical way to explain it on a web forum. At least the old folks like me get a chuckle out of it.

Re: Sand Like The Sandpaper Was Free

#19

Re: Teach 'em to use one sheet...

Bart Leetch

Old come on Chuck I ain't old yet but I know what Mike is talking about