Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Now I'm curious

Posts

Re: Now I'm curious

#51

Turned for a long time without one...

Mike Rubes, Apex, NC

Good question. I did turn for 4 or 5 years before I bought one. Frankly, it got to be very expensive as I was buying most of my wood. The green wood I did get was cut with an ax and a bowsaw. The chainsaw is much more effective!

I have just your basic, little Stihl 250. Nothing fancy, but gets the job done nicely.

As much as I use it and enjoy it, I find that the "turning" tool (other than the lathe) that I use even more is the bandsaw. I turned for about 2 years without that and while I can imagine giving up the chainsaw for turning, I cannot imagine giving up the bandsaw. That is now essential to me.

Here's the Stihl about 3 years ago when it was brand new. Had about an hour on it at that point :)

Mike

Has some favorites, but not planning to give up any tools in Apex, NC!!


Re: Now I'm curious

#52

Re: Now I'm curious

Matt Overton

I've got 4. One big, one small, onebig electric, and one on a pole that attatches to my weedwacker. If I can think of another configuration, I'll probably buy one of those too.

Re: Now I'm curious

#53

Ken Vaughan

You do not have to have a chainsaw if

ken Vaughan

you have friends with gas powered chainsaws, and you provide the Alaskan Amber after the cutting party is over. (Stockholder in Alaskan Brewery and add a shameless shill).

(I have a cheap electric chain saw for breaking down the booty now)

What is essential is that you have the capability of packing and hauling wet and green timber and keep peace with the other users of the modes of transportation.

Plastic tarps are really essential!!!

Then there is the Bandsaw!!!

Re: Now I'm curious

#54

Me two!

Molly Winton

Re: Now I'm curious

#55

Two that aren't used much now :-(

Doug Thompson near Cleveland

Re: Now I'm curious

#56

Re: Two that aren't used much now :-(

Jim Rutten

I own 3. Two Stihl's big and smaller (the smaller one gets used a lot more than the bigger one) and a Reminton electric. I went for several years without a chainsaw though. Living in the city I think my neighbors might be frightened if I tried to cut down one of the big trees in my yard. My wife and I went to a lot of woodturning symposiums and I picked up dry wood at these shows. Then when her grandmother passed away and we decided to buy her farm that probably has 10 acres of wood that changed. Just a question for those of you who use the electrics indoors: What do you mount it on. I would think cutting it on the floor would give you a big kickback when the saw hit the cement!

Re: Now I'm curious

#57

Roger Dunn

Husky 394 and 385

Roger Dunn

Re: Now I'm curious

#58

Re: Me One! Stihl.

Ronny Eelen (Belgium)

Re: Now I'm curious

#59

Re: Two that aren't used much now :-(

bill crommett

Jim: I put together a fold-able (three part ) stand about waist high out of two X two's that have disposable (sacrificial) strips glued on the top of each section. It serves the function well and folds up out of the way when not in use.

Re: Now I'm curious

#60

Steve Kubien

I'm a little late to this party but...

Steve Kubien

I am a one chainsaw guy, a Stihl MS390 with an 18" bar. I really need to get a longer one. My first saw was an electric but I only had a mini lathe at the time. Now, if I end up with a 2436, Stubby or American Beauty, I can't even imagine how big a saw I will need!

Re: Now I'm curious

#61

Re: I'm a little late to this party but...

John Jordan

I prefer the 18" bar. I find it easier and less awkward in most cases, and it will cut through a near 3 ft log. I have an 038 Stihl which will run most any bar. I also have an 044, but I'm not manly enough to use it except when really needed.

Here's a nice one with a 49 inch bar. I would hate to have to use it much-it's really heavy. :O


John

Re: Now I'm curious

#62

bars and chains

John K Jordan

This is the place I use mostly for chains and bars. They sell combos to fit your saw. You can quickly swap a short bar for a longer one as needed.

http://www.baileysonline.com/

I use a 24" bar on one saw and it is great WHEN I need it. I sliced up a 48" oak tree once. But I would hate to use it all the time. 99% of the time I use one of my smaller saws, a pair of MS250 Stihls with 16" bars. This combination is light weight and I believe safer than swinging a larger bar when not needed. I can easily carve up a 30"+ log with the smaller saws.

BTW, I keep two of the same size saw in case mostly to save time. I can work twice as long without stopping to sharpen or even refuel. Sometimes I can avoid sharpening until I get back to the shop. Also, it's best to let a saw and chain cool before sharpening in the field so using the second one lets the first cool down. And the really big advantage to taking two saws: if one gets jammed you can cut it out with the other! (Second-best trick for a jam: take an extra bar and chain and the wrench, remove the saw head, and cut it loose with the spare bar)

JKJ

Re: Now I'm curious

#63

Steve Kubien

I'm sort of thinking...

Steve Kubien

...that a 20" or a 24" bar would be nice. My lathe only swings 16" inboard but with a longer bar I would never have to work from both sides of a log. I certainly wouldn't want to use it all day (or that monster you have in the picture!).

Truth is, I really hate using a chainsaw. It's loud, the vibration is hard on my carpal tunnel syndrome, it's messy, it's heavy work...Damnit, it's work! Nope, for me a chainsaw is an evil I must endure in order to turn wood that I don't have to buy. That makes it worth it but I still don't like it.