1-gas, 1-electric
Gil Jones
Knowledge You Can Build On — Est. 1998
1-gas, 1-electric
Gil Jones
Proud owner of a Husky
Scott Burr in Ben Lomond CA
Re: Now I'm curious
Carole Valentine
Starting is no longer a problem with the Stihl EZ-start. I can start my saw with one finger. Forget the model...MS260 maybe? 18" bar. Love it. Now my old Crapsman was a different story...one was as likely to have a coronary as to get that thing started!
Husky 460 / 395
George Guadiane
The 460 has a 20 inch bar and the big one has a 36 inch bar (going to get a 24 inch bar for "smaller" stuff).
Re: Now I'm curious
robo hippy
I have a Husky with a 24 inch bar, a Sthil with a 36 inch bar, an electric Husky that I don't use as much as I do my Laguna 16HD bandsaw, and a Poulan that I used to use when setting up foundation footings, or footers as you easterners say. Haven't used it in years.
robo hippy
Re: Husky 460 / 395
Dave Peebles Lyons, Ohio
Carole,
I could not imagine not having one... but I have two. 
My gas saw is a 346 XP Husqvarna with a 20" bar. It replaced a Husqvarna homeowner type saw, I believe it was a model 41. I killed that one, but it took me a few years to do it. I cut a lot of bowl blank with it.
My other is a fine little Stihl electric 180-C. It cost a bundle, but it is the best electic saw I have ever used. It is a beast!! and I use it quite often in the shop. I burned up a couple of the Wens when I was building my pole barn. This one will probably be passed down at least a couple generations. Or more likely listed here on the classifieds when I drop my body. 
Dave
2 Electric
Colin
Of Course.... I Have Four
Barbara Gill
I had to edit my post as I forgot about the electric one I use at thr shop and the one with the 36" bar.
I can't imagine where he got his information; maybe it was "created".
Re: Of Course.... I Have Four
Bill Blasic
I have three Stihls and two electrics. I'm going to purchase a new Stihl electric as the others are not very good.
Bill
Re: Now I'm curious
Jeff Rich
I have 2 Poulan Pro refurbs, 2 old Stihls that I combined into 1 over the past weekend, so I am looking for 041AV parts, maybe someone has one laying around........
I also have 2 electrics, one battery powered.
These are for trimming indors or small cutting projects.
This weekend I will be cutting with the Stihl for the first time.
It has a 30" bar and lots of power. I will have to be very careful with this one.
Stihl electric
John K Jordan
The Stihl electric is well worth the cost compared to the other electric saws I've had, especially if you want to use it to actually cut wood.
JKJ
Now Russ.... :-)
Barbara Gill
Stihl Farm Boss X 2
Cyril Griesbach
4
Don Orr
3 gas, 1 electric.
Re: Even the ladies have chainsaws
Dick Hines
Barbara even has her own mill.
A 4' diameter elm tree was the impetus
steven antonucci
Andy DiPietro and I spent a 95 degree day in a field rolling this log with a wrecking bar. I bought a peavy shortly afterwards. I can now handle logs about 30" in diameter by myself with my Stihl 017 (14" cutting capacity, rolling the log, and snapping the center with the leverage I get from the hook)
Steve
I have a Stihl 260 Pro 18", but....
Rob Wallace
.....we have about half of our club members who don't have chain saws. Hard to determine if the statement you make is true, but it's not far from the truth in my estimation...
(I also have a Ryobi Electric chain saw with an 18" bar for when I need to use it in the shop to trim blanks.)
Rob Wallace
Re: Now I'm curious
Jeff Willaford
I feel bad. I have only one Stihl 026.... for about 20+ years now. 20 inch bar. I burned a lot of wood before I found out it could be turned.
One gas, one electric.
Texian
Re: I have a Stihl 260 Pro 18", but....
Carole Valentine
Rob, I didn't make the statement - Charlie did. I simply questioned it. I suppose that in the case of clubs where a good portion of members do have saws maybe it would not be necessary to own one since a non-owner could participate in collection and sharing in other ways (loading, transporting, etc.) Not having a local club (or even many other turners) nearby practically guarantees that if I don't own a chainsaw, I don't do much turning. Other than my lathe, the two machines I would have to replace immediately if they died would be my chainsaw and my bandsaw! Segmented turners, of course, are another story.
Doesn't it depend on what you do?
Dinyar Chavda
I wonder if Hans Weissflog has a chainsaw? And if he doesn't, does that make him a dilettante woodturner? I know Bill Smith has a chainsaw, but I doubt if he makes his segmented pieces from wood he has cut down.
Re: Doesn't it depend on what you do?
Ruth Niles
Nah, it's just fun to use a chainsaw! I cut a lot of wood with my chainsaw that never gets turned. I would not own a chainsaw if I wasn't a woodturner........only because...well, just because
"It's a wood thing" 
Re: one, Stihl
Carol Reed
So when do the neighbors get back from vacation?
Craig Daymon
One electric
Craig Daymon