Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Maple box with koa inlay...

Posts

Maple box with koa inlay...

#1

Mike Stafford

Maple box with koa inlay...

Mike Stafford

Maple and similar woods have very plain end grain no matter how beautiful the curl or birdseye might be in the long grain. I am always looking for ways to address the relative plainness of this end grain by using texturing, chatterwork, inlays and cabochons.

Here is plain and simple box in some soft maple that has an inlay from some beautiful curly koa scraps that I saved from a blank that David Chung sent me. I have not turned the blank he sent yet but I do drool over it occasionally.

This box is 2 1/2" tall and 2 3/4" in diameter. Your comments appreciated...

Re: Maple box with koa inlay...

#2

Dick Hines

Re: Maple box with koa inlay...

Dick Hines

Great job Mike. Save all the cutoffs. You never know where one will come in handy.

I have 4 plastic tubs of them.

Re: Maple box with koa inlay...

#3

Re: Maple box with koa inlay...

Carole Valentine

And now you know why I have boxes and boxes full of seemingly useless cutoffs! LOL Nice one, Mike. One hardly sees the maple for looking at the Koa.

Re: Maple box with koa inlay...

#4

That's a beauty!!

Greg Haugen

I like it. A lot. Very elegant form, I like the subtle curve to the sides as well as the curve of the bottom and the edge of the lid are nice complimentary elements. Very Nice!

Is it this year or next year when you're taking up the crime of "cheeseburger" smuggling? :-)

Very nice Box!!

Re: Maple box with koa inlay...

#5

Mike Stafford

Re: That's a beauty!!

Mike Stafford

I was a cheeseburger smuggler for a long time but have been on parole in recent years.

Next year in August I will have to return to my life of crime... I think Mike is a bad influence as he is the one who suggested it.

Thanks guys, I like doing inlays and I really like doing them when they work well.

Re: Maple box with koa inlay...

#6

Re: Maple and Koa...

david

is a great combination. Koa goes well with many light colored woods and I particularly like the combination with mango wood. Great job with the box as usual.

Re: Maple box with koa inlay...

#7

LOL!  :-)

Greg Haugen

Re: Maple box with koa inlay...

#8

Barb Siddiqui

Re: Maple box with koa inlay...

Barb Siddiqui

Graceful.. and nice dress-up with the koa.

Re: Maple box with koa inlay...

#9

Re: Maple box with koa inlay...

Mike Rubes, Apex, NC

Hi Mike,

I really like the koa with the maple. That combination works very well. Very nice box, as well. Great shape.

Thanks for the pics,

Mike

Can hear the lathe calling tonight in Apex, NC!

Re: Maple box with koa inlay...

#10

Bob Moffett

Re: Maple box with koa inlay...

Bob Moffett

You outdid yourself on this one. Very Nice!

Re: Maple box with koa inlay...

#11

A question...

Barry Irby

That's a really nice looking box. I like it a lot.

My question is about the "cross grain" situation in the lid. Have you done many of these? have you observed them over a couple of seasons? Do the inserts stay nicely fitted or does the wood move in differing directions?

Re: Maple box with koa inlay...

#12

Mike Stafford

An answer...

Mike Stafford

Yes, I have done many of these and yes I have observed what happens over time.

Malcolm Tibbetts actually gave me good advice on one of my first postings of a box with a cross grain inlay. His advice was 1) not to do it and 2) if you are going to do it anyway don't glue the entire surface of the inlay; glue only the center or the ends where the long grain is.

So now I don't glue the entire inlay although I still have several of my boxes from when I started doing inlays and there have been no problems. Once I was told that if I used very dry wood for the inlays problems would be minimal because of the relatively small size.

For stone cabochons and similar materials I use a dab of silicone since they are not going to move with the wood at all.

Re: Maple box with koa inlay...

#13

Re: An answer...

John Lucas

Mike I've really been trying to get a handle on wood movement issues with multiple part projects. Your boxes are small enough that the wood movement will be minimal. Probably on the order or 1/64 give or take a little. Both pieces are going to move but the side grain will move in a different direction.

Malcolm is correct (of course). When inserting cobachons, metal or wood inserts I try to leave a small gap. I try to make it decorative so it doesn't look like it's on purpose. Then I glue only the middle. I often use a glue called Elmers F26. It is glue that stays flexible but holds very strongly. I have also used Clear silicone caulk (which is what I use to glue in my mirror glass)

Just to give you some idea of the woodmovement. My cupcake boxes are side grain body with end grain lids. The threads are 16TPI with a depth of .035" They change shape through out the year and sometimes the lid is loose and sometimes it had a little friction to the rotation. There can't be much movement there or the threads would be a lot sloppier. These are about 2 1/2" in diameter. .015" is about 1/64" and I don't think they move that much.

Re: Maple box with koa inlay...

#14

Mike Stafford

Re: An answer...

Mike Stafford

That is interesting and it is informative that you have taken the time to really observe and measure the changes. I have not...

My observations have just been that an observation to see if I had any cracks developing or a loosening of the inlay or cabochon. To date I have had no problems (knock on wood, shouldn't have said that).

I always feel more comfortable using an end grain inlay rather than a cross grain one. I have heard it argued, however, that if you are inlaying different species you could still have contraction/expansion problems.

Just like Scarlett, I think I will worry about that tomorrow...