Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Coring tool choice

Posts

Re: Coring tool choice

#26

Re: Coring tool choice

robo hippy

All of the cutters, on all 3 systems are about 3/8 inches wide, with the exception of the McNaughton mini and micro systems. The spear point on the McNaughton will give you a shaving about 1/2 inch plus wide. I heard Greg Jenson (Mc. rep in US) comment on how the spear point would make the shaving fold in half and come easily out the kerf. Well, for me, just the opposite happens, they open up and I get a lot more plugging up. With the tip ground off, the kerf clears easily, and I can core small bowls with out having to clear the chips by removing the blade, and some times on larger bowls as well.

I did have one of Mike Hunters tips put on one of my blades. It works nicely. He sent one that was long and just about as wide as the blade. Didn't like it. The next one was a square, and mounted, it was almost exactly like the McNaughton tip. It worked a lot better. I still prefer the sqaure profile that I have reground on my blades.

I have racked my brain trying to see if there was another type of cutter tip that would cut with less effort. I don't think it is possible. Even if you could get a shear cut, the shavings/chips still have to eject, and the only way to get a shear angle would be to have some thing like half of a bowl gouge profile, with the bottom part still cutting like a scraper. All systems are basically scrapers. Hmmmm, mini carbide rotating cutters on the tip, like a router?????....... Laser cutter?????? Sawdust would eject nicely. Probably not, but fun to think about.

robo hippy

Re: Coring tool choice

#27

Re: Coring tool choice - Thanks for the input

Steve Criscenzo

Thanks for the offer. Unfortuantely, it is a long way from central North Carolina. I may try to find something local.

Steve