Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Suitable woods for turning?

Posts

Suitable woods for turning?

#1

JL

Suitable woods for turning?

JL

Our church is going to be starting a construction project.

Part of the project will involve the cutting down of several trees. Some of these trees were planted/donated by various parishioners. It was suggested that I "make suitable gifts" out of the wood from some of these trees.

Yes, I could just try turning some - but I have enough on my plate right now.

So anyway - the trees are:

Magnolia - from what I've read (mainly here) - should be okay. These trees are about 20-30 years old.

Leland Cypress - I haven't a clue.

Weeping Cherry - I haven't a clue - I was offered some once, but I turned it down.

Crepe Myrtle - from what I've read here, mixed bag.

The magnolia trees have some size to them and look quite good. They grow slow around here - so that may be an advantage. Anyway - comments on these woods and potential pitfalls would be appreciated.

Re: Suitable woods for turning?

#2

Re: Suitable woods for turning?

Barbara Gill

I really like the Magnolia; it can be an interesting wood. The Crepe Myrtle is neat but turn it right away and turn it thin. It will crack quickly. I had some short 8" diameter pieces that cracked the whole length within 2 weeks.

Re: Suitable woods for turning?

#3

Re: Suitable woods for turning?

John Veerkamp, Western Mo

The cherry should react like orchard cherry. Often very pretty color and grain, but prone to cracking like other fruit woods. I've turned bald cypress not Leland. It was ok but unremarkable.

Re: Suitable woods for turning?

#4

Re: Suitable woods for turning?

Emmett Manley, Lakeland, TN

Magnolia is your best bet -- it can be very pretty wood and easy to turn although some warping may be encountered. Crepe myrtle is usually a disappointment. The cherry might work out but expect to deal with the usual fruit tree cracking.

Leland cypress is an unknown to me, but I have turned some pretty objects from similar decorative junipers. Check it out -- since this shrub grows so rapidly, I expect the wood is unremarkable, but you never know. 8)

Re: Suitable woods for turning?

#5

Re: Suitable woods for turning?

Ken Oakley-Sunny St. Cloud, Fla

I am pretty sure this is Leyland Cypress. It is not as grainy as Baldy Cypress and cuts and sands very well. Haven't turned any though.

Re: Suitable woods for turning?

#6

Chuck Jones - West TN

Re: Suitable woods for turning?

Chuck Jones - West TN

I've had limited experience with crepe myrtle. We trimmed one back this spring before the sap started rising. I couldn't resist saving a few 2-3 inch diameter pieces. I turned a small vase from a piece a few days later. The grain is nothing to get excited about, but the color is almost as white as holly and it turned and sanded beautifully. I left the "tenon" on thinking I might have to work on it more later, but it hasn't even warped or cracked. I haven't noticed any cracks in any of the remaining pieces. Probably has a lot to do with the sap being down.

Re: Suitable woods for turning?

#7

Re: Suitable woods for turning?

john pickett

I have found crepe myrtle great for chess pieces.

Re: Suitable woods for turning?

#8

JL

Thanks all.

JL

I'll see what the powers that be want. I know that the magnolias were purchased and planted by parishioners that are still around. I'll turn something from them first. I'll also try the crepe myrtle. Hopefully the weeping cherry will survive (it's up on the hill) - but the roots may get disturbed too much.