Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Turning Accident

Posts

Turning Accident

#1

Turning Accident

Brian George

I was talking with John Hill of AAW insurance and he was telling me about a horrible accident at a Minnesota club meeting.

Seems one the members picked up a tool and was looking at it. After looking he put it on his shoulder and turned around only to have the tool catch someone behind him that was looking over his shoulder unbeknown to the person holding the tool.

You guessed it, the tool cut the second persons eye and blinded him.

True story - just happened...

Re: Turning Accident

#2

Re: Put it on his shoulder! Dang, I ......

JamieDonaldson

...don't even want to imagine that scene!

Re: Turning Accident

#3

Steve Kubien

Re: Turning Accident

Steve Kubien

A lot of simple, basic lessons to be learned (or reinforced) here. Really sad.

Re: Turning Accident

#4

Steven Antonucci

Thanks for the post

Steven Antonucci

One of my clubs has a "Turnathon" meeting in a a few days. We'll have 6 lathes with people migrating and moving all around them. It's a little bit chaotic, and I'll start with this story to mke sure people know to be smart about how they handle tools and move through a crowd.

steve

Re: Turning Accident

#5

No accident yet, but...

Bill Howatt

On a slightly similar issue, I was holding a gouge by the "blade" and was changing my glasses to do some turning. I was holding the turning glasses and the gouge with the same hand and using my other hand to remove the unwanted glasses. I lifted the new glasses into place and realized that I was very close to sticking the gouge into my eye.

Just one of those dumb things that can happen and now I make sure I just leave the gouge alone until I get the right glasses and other safety equipment on.

Bill

Re: Turning Accident

#6

Re: Turning Accident

Dave Moore

Well, that made the hair stand up on my forearms, that's for sure.

Yikes.

Re: Turning Accident

#7

That's awful

Mike Foster

I had a very similar accident when I was in seventh grade, only with a golf club in a PE class. I took a 9 iron to the face and got really lucky that I did not lose teeth or an eye. The circumstances were similar in that the class was all heading in after the bell and the guy ahead of me decided to take a swing catching me totally unaware.

It is major bad luck that this happened, and that one of our fellow turners lost his vision in the eye as a result.

A few of the turners in our neck of the woods are getting together for a second session of playing. We are really in the initial stages of forming a group, and have discussed possibly becoming an AAW chapter. I will definitely take some time to relate this story at the beginning of our session. Could be a good motivation to get a chapter going and getting some insurance.

Mike

Re: Turning Accident

#8

Re: That's awful

Emmett Manley, Lakeland, TN

On a similar note, there was an accident in Memphis yesterday when a tree trimmer, holding a chainsaw in one hand, had it kick back and cut off his right arm above the elbow. He made it to the hospital so I assume that he is still alive.

Re: Turning Accident

#9

Re: Turning Accident

Bill Grumbine (Kutztown PA)

This is one of the reasons I like to maintain a large personal space, especially when other people are waving sharp tools around. Arm's length is the rule unless I am confident they aren't going to do something sudden and unpredictable. We need to remind ourselves every time we come into a room with tools that they are dangerous and can cause injury or death if we become complacent.

Re: Turning Accident

#10

Re: Mike- I have started 2 chapters, so........

JamieDonaldson

...if you would like a set of sample by-laws or other info just ask.

Re: Turning Accident

#11

Re: From a safety guy

Steve Criscenzo

One of my responsibilities in my job is safety coordination for a large work force involved in field testing for engineering and construction. As such I have investigated many accidents. One of the things I have learned is that we have a hard and fast rule. If you are in a work area, you must must wear appropriate presonal protective equipment regardless if you are opperating equipment. Many accidents are cuased by the mistakes of others. When my people get out of their truck they have on their gear. Perhaps the lesson is that if you are in the proximity of tools, you should be wearing eye protection.

I have had scouts in my shop for the past 18 years. Before they walk in, there is a list of rules and the first is to put on eye protection. Same for my kids and other adults in my shop.

This is a very sad story and at lesat two lives are very much changed. It is important that we learn from it. Is it too much to expect that everyone have eye protection at club events.

Very Sad

Steve

Re: Turning Accident

#12

Re: Turning Accident

Don Orr

How frightening ! It always amazes me how the actions of one person can change the life of another in a split second of inattention or carelessness. I see it all the time since I work in health care. I spent many years doing CAT scans in an ER and have seen many lives changed forever because of someone else.

As they said on "Hill Street Blues"-be careful out there !