Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

lathe choices

Posts

Re: lathe choices

#26

Lyle Jamieson

Re: lathe choices

Lyle Jamieson

Yes, Jerry you are correct. Now that Jet is involved the service from PM has improved significantly. Didt mean to imply there were any service issues now. Just different then you get from a made in USA machine. When you spend a couple thousand more for a lathe you get more lathe. Can you turn the same things on a cheaper lathe?? Absolutely!! Can I have just as much fun on a cheaper lathe??...almost. Thats the kicker. The better equipment you have the more fun it is to turn and the easier and faster it is to turn. I can turn on my drill press or a Shopsmith but the limitations would soon drive me crazy.

Re: lathe choices

#27

Re: lathe choices

Wally Dickerman in Arizona

I get a kick out of young turners that say their new lathe will last them for a lifetime. You have no idea what the next big improvement will be in lathes. One of the latest and best, is the sliding headstock.

Experienced turners will buy a lathe that suits their kind of turning. I'm on my 9th lathe since the little Sears Dunlop in 1936. Each one better than the last one. This one is a Oneway shortbed. I have very limited space in my shop so the shortbed works. I have Oneway's tailstock swinger, which, when closed adds about 4 inches to the bed length. Much the best lathe I've had.

I have the 17 inch outboard bed, and that's where I do all of my hollowing....in reverse, because I'm a lefty. 2 hp, and that's all I need.

Wally