Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Took a plunge just in time!

Posts

Took a plunge just in time!

#1

Took a plunge just in time!

Jeff Rich

I ordered a McNaughton tool yesterday, just in time!

A neighbor brought down a maple that was partially dead and in danger of falling on a neighboring home, although most around here would like to see that structure go away.....

I will post some pics later.

One section of the trunk is nearly 4 ft in diameter and 4 ft long, which of course has been claimed by me. I will likely get more wood, if it is useful out of this big ol' tree.

I am going to try to get the stump as well. lots of ripple.

This neighbor also just started an excavating company, hows that for a good day!

Re: Took a plunge just in time!

#2

Chuck Jones - West TN

Some similiarities here

Chuck Jones - West TN

Jeff,

Don't want to distract from your gloat, but I'm amused at the similarities:

You've ordered a McNaughton; I got mine a few days ago.

Your neighbor dropped a huge maple; Mine dropped a huge box elder.

The maple is 4' diameter; the box elder about 2'+.

You snagged the maple; I snagged the box elder.

You are going back for the stump; I'm going back for the stump.

You'll need a pressure washer; I'm using my wife's (unless she catches on).

Your neighbor has excavating equipment; mine too, (otherwise he could keep the stump).

This happens to be the soundest box elder I've found. I have cut several on my place that are not much good.

Have fun with your maple.


Re: Took a plunge just in time!

#3

Re: Some similiarities here

Jeff Rich

Here is a pic of the main trunk end.

Re: Took a plunge just in time!

#4

Chuck Jones - West TN

Wow! That's a lot of log.

Chuck Jones - West TN