Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Fear the chuck

Posts

Re: Fear the chuck

#26

Man, I would file those outside corners....

Barry Irby

a little rounder. With those sharp corners it looks too much like a saw blade.

I like your extenders. Much more "machinist" than mine. I made hooks out of flat stock for mine. I really like them. One thing I learned is that you only need one screw to secure them to the plate. This allows you to pivot them a bit to fit the oval or slightly irregular shape of the bowl. You can also turn them and chuck a square or rectangular piece.

Re: Fear the chuck

#27

Re: no fear BUT huge respect & caution

Keith T

I would machine a large plexiglass disc to go behind this...it would act as a guard, limiting how much damage this could cause.

Re: Fear the chuck

#28

ebd

Re: no fear BUT huge respect & caution

ebd

Wouldn't work - disk would have to go behind the chuck body. Too far away to do any good. Anyway being careful and aware is all that's required. Same as when working by the blade of a 53" sawmill.

Re: Fear the chuck

#29

ebd

Re: Man, I would file those outside corners....

ebd

Filing the extenders would bugger up the precision balance. All that's required is being careful and aware. Running my jointer scares me a lot more.

Re: Fear the chuck

#30

Re: no fear BUT huge respect & caution

Keith T

Hi ebd, I drew up a possibility, but looks like I lost my password and cannot post image.The disc can mount directly behind jaws utilizing slots in jaws...loosten bolts securing disc to jaws, adjust, then retighten. Problem is...you may be very safe using this setup, but many people may run off to a machinist to duplicate your design....who knows their skill level, and the trouble they may get themselves into. The disc may prevent someone from serious injury.