Cocobolo box...
Mike Stafford
Here is a cocobolo box 2 1/2" tall and 3 1/2" in diameter that I completed Sunday afternoon.
I thought it would be appropriate to post it since we had the discussion about sanding with wax. I always sand cocobolo, tulipwood, kingwood, and most other dense exotics with wax to prevent heat checks. In this instance I sanded through 400 with Klingspor Gold and then switched to some wet/dry paper and sanded until 1200 using wax with each grit and cleaning between grits with odorless mineral spirits. I let this box and some others dry for a day or two before putting on the final wax finish which was applied with coarse cheese cloth and steel wool which totally randomizes the scratch pattern. Once the wax is dry I buff it with soft cloth followed by some soft felt.
Then a top coat of microcrystalline wax is applied to reduce fingerprints. My experience has shown me that boxes such as this are fondled frequently....
The exceptionally straight grain of this stick of wood created an almost perfect grain alignment at the join.
All comments appreciated.... 
That's a beauty!! Simply Stunning!




