Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

My first stab at piercing

Posts

My first stab at piercing

#1

My first stab at piercing

Mike Foster

Pun intended. I finished this first try at piercing, finally. Did a lot of experimenting with it. Added a little texture and really experimented a lot with airbrushing guided by Bin Pho's DVD. I used a lot of masking to keep colors clean. I think the piece is overdone in aqua (titled it aquawave) but chalked it up to a learning experience. The piece was originally about 2 " taller, but a little inattention while the piece was spinning (and I was not turning) led to the loss of some height. I thought it looked good enough to practice with so went ahead and finished the piece. I also turned this from half a log, and as it dried the piece distorted rather unattractively but that is hard to see in the photo. I'm not sure where this will lead, but it is fun and I'm sure I'll try some more sometime. C and C welcome. Maple, 5.5"h x 6.5"d

Re: My first stab at piercing

#2

Re: My first stab at piercing

Bill Youngblood

I think it's GREAT!!! The design seems to be consistant in the sizes of both the positive and negative spaces. Nice use of the color also. Good work. I also have been dabbling with piercing and am loving it. Good Luck.

Re: My first stab at piercing

#3

Re: My first stab at piercing

john lucas

I love the little feet. I know, you spent most of your time on the piercing. It's the little extras that make these pieces nice. You did a great job on the piercing. As was mentioned above. The negative spaces are as important if not more so than the wood that's left. Good job.

Re: My first stab at piercing

#4

Re: My first stab at piercing

Cyril Griesbach

I can't expand on what's already been said other than to repeat that you've done a wonderful job on it and if this is a practice/experiment I can't wait to see more.

Well done.

Re: My first stab at piercing

#5

Re: My first stab at piercing

John K Jordan

Fantastic. I love the color gradients and contrasts.

Re: My first stab at piercing

#6

Steven Antonucci

Did you make your wife sand it?  :-)

Steven Antonucci

Pretty nice bit of practice. Are you bringing it to Saratoga Springs?

s

Re: My first stab at piercing

#7

Re: My first stab at piercing

Randy Gleckler

Very nice job.

Re: My first stab at piercing

#8

That'll do nicely Mike !

Don Orr

Wonderful piece all around. I especially like the non-random pattern of the negative space. So many piercers do the same random piercing it's nice to see a different take. Your pattern must be more trouble to lay out but it shows attention to detail which you excell at.

I like the colors very much. How do you keep the paint used on the outside off the inside ? Is it masked off ?

Strong work-well done !

Re: My first stab at piercing

#9

Wow! Simply stunning...Nicely Done

Greg Haugen

Re: My first stab at piercing

#10

Steve Kubien

Re: My first stab at piercing

Steve Kubien

Holy cr*p! Very nice indeed!

Re: My first stab at piercing

#11

Re: My first stab at piercing

fgvanatta

Beautiful piece, well executed.

Frank

Re: My first stab at piercing

#12

Re: Did you make your wife sand it?  :-)

Mike Foster

Hi Steve,

No Susan wouldn't have the patience to do anything like sand it and I couldn't convince her to do it with a 2x4. Yes I do plan on bringing it to Saratoga. Will look forward to seeing you there.

Mike

Re: My first stab at piercing

#13

Re: That'll do nicely Mike !

Mike Foster

Hi Don,

Yes a lot of masking on this piece. Inside, outside, outside, outside. Masking the piece actually took a lot longer than painting it. I am still in the beginning learning curve with the airbrush, and gained a lot of insight by viewing Bin Pho's DVD on the subject. Hope to see you in Saratoga.

Mike

Re: My first stab at piercing

#14

thanks

Mike Foster

Thanks for the encouragement all, but you were supposed to critique it. This is a learning experience for me.

Mike

Re: My first stab at piercing

#15

Re: thanks

Don at Central Illinois

If you want a critique, it won't hold soup! Other than that, I don't even aspire to that kind of turning, yet, so I can't really critique it for you. I do think it is well done and very nice.

Re: My first stab at piercing

#16

Re: My first stab at piercing

Brian George

To me - That is an excellent example of the craft of turning being enhanced. In my humble opinion, too many times something somehow qualifies as a turning when a very minor part of the entire process is turned. Not that the finished piece is not artistic but, just doesn't qulify as a turning entry. Congratulations on a beautiful piece!!!