Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Blister maple sugar bowl....

Posts

Blister maple sugar bowl....

#1

Mike Stafford

Blister maple sugar bowl....

Mike Stafford

You may remember the saga of the blister maple that Terry Quiram sent me that I rough turned too thin and ruined for conventional boxes because I underestimated how much it would move when it dried.

I saved all the pieces and have been trying to figure out how I might salvage this gorgeous wood and still make a box.

Here is an attempt at salvage. When Ed Moore visited I had almost completed this box but the lid fit was so tight Ed thought my little knob was in peril and would be broken by someone trying to remove the lid. I returned the internal flange on the lid and now it stays on when inverted but does not require great strength to remove it.

This box is 3" tall and 3 3/4" in diameter not including the chattered ebony knob.

Comments and critiques appreciated....

Re: Blister maple sugar bowl....

#2

Hey Mike, its a beauty, and

gil jones

I do like that subtle calabash shape of the box.

Mighty good lookin' wood too.

Gil

Re: Blister maple sugar bowl....

#3

That's a beauty

john lucas

Re: Blister maple sugar bowl....

#4

Re: Blister maple sugar bowl....

david

Mike: That is a beautiful bowl and the figure is spectacular. I know lids with knobs have a purpose, but I think this one would look great without a knob too. Your boxes are top notch.

Re: Blister maple sugar bowl....

#5

Blister maple sugar bowl.... I like it!

Ed Moore in SW VA

Good job Mike.

Ed

Re: Blister maple sugar bowl....

#6

Re: Blister maple sugar bowl....

Jennifer Indy.USA

Looks like you fixed your problem Mike. Very nice!

Re: Blister maple sugar bowl....

#7

Re: Blister maple sugar bowl....

Carol Reed

Aww gees, Mike.

I got drool all over the keyboard and the Kleenix box was empty! Excuse me while I go clean up.

BTW - lovely, lovely, lovely.

Re: Blister maple sugar bowl....

#8

Re: Blister maple sugar bowl....

Matt Overton

If this was a mistake, you need to make more of them! How thin is it if you rough turned too thin and what did you have to adjust?

Re: Blister maple sugar bowl....

#9

"Sweet" !

Don Orr

Re: Blister maple sugar bowl....

#10

That's a Beauty!!

Greg Haugen

Such beautiful wood, showcased so nicely in that form. I've studied this box a while now. The finial throws me off a little. At first I wasn't sure what it was, if it's the "90 degree-ness" of the under side of it or the flatness of it compared to the rest form or what. It's growing on me though..... Nice Work.

Re: Blister maple sugar bowl....

#11

Re: Blister maple sugar bowl....

Terry Quiram

Nice save Mike. I still have a couple pieces of this wood. I need to get into gear and make a couple of boxes.

Re: Blister maple sugar bowl....

#12

Mike Stafford

Re: Blister maple sugar bowl....

Mike Stafford

Matt, the mistake occurred when I rough turned/hollowed the blanks for end grain boxes I did not correctly estimate how "oval" the blank would be after it dried.

So when the wood was dry I was unable to turn a flange on what would become the body of the box that would also mate with a trued up lid blank which also became oval after drying. The inside diameter of the lid would have been too large when it was trued to snugly fit on the body flange when it was trued.

Hard to turn a box with an overfitting lid under those circumstances.... :\

I am not one to waste beautiful wood so I continue to figure ways to save this it.

Re: Blister maple sugar bowl....

#13

Mike Stafford

One thing I ain't....

Mike Stafford

is very good at designing knobs and finials....

True story....

Ed Moore visited me recently. I took his ornaments and box class last year (It is coming up May 16-22 at John C. Campbell) and since it was near Christmas my wife had some of my ornaments and those from Ed and other turners on display. There was one ornament that she and I both were unsure as to the turner. I was pretty sure I turned it during Ed's class and she thought it was Ed's. I asked Ed and he said, "No way I turned that with a little snicker" which confirmed to me that I turned it. It was funny the way declined ownership....

I didn't think it was all that bad....but like I said I am not a great designer of knobs and finials.

Re: Blister maple sugar bowl....

#14

Re: One thing I ain't....

Greg Haugen

It's a beauty Mike. That's a real nitpick, and it was only at first-it's grown on me since but I know you and I like a "constructive critique" more than a "Gee, that's nice" and that's it. So I wanted to at least mention it, bottom line though-it's a beauty.

I don't turn many finials either, except for ornaments. I'll leave that for Drozda, Burns, and Reilly. I put a finial on something and screw it up. I posted a Ray Key styled "Finial" box (ambrosia maple) on WC and WOW, I don't think anyone liked the first attempt so I turned a jam chuck and turned the finial down to a "sphere" shape and people liked it better. It ended up being one of the fastest selling boxes at the gallery.

Finials and pedestals are an art form of their own.

I do like the chatter on the finial, that's a nice addition.