Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Translucent Natural Edge

Posts

Translucent Natural Edge

#1

Translucent Natural Edge 

david

Norfolk Island Pine. So many logs; so little time! Before soaking in Watco (natural) Danish Oil, I cannot predict whether the piece will be dark where the spalting streaks are. I guess it depends on the soil conditions where the tree grows. This one was dark. Turned about 4 months after cutting and left out to weather. With the smaller trunk pieces, I am starting to explore the curves that can occur on the perimeter near the branches. 8" across, 4" high. Wall thickness about 1/8". Comments welcome.

Re: Translucent Natural Edge

#2

Re: Translucent Natural Edge

Ken Oakley-Sunny St. Cloud, Fla

I have about 6 logs of N.I.P. The guy who gave them to me wants a bowl turned as payment for the logs.- Do I cut a blank cross grain or with the grain? If I gave him a bowl that looked like yours he would owe me a lifetime supply of wood--He is a tree cutter/Arborist.

Re: Translucent Natural Edge

#3

Re: Translucent Natural Edge

david

Ken: Turning NIP end grain is the most common method. Because the branches can be at the same level around the trunk, where the walls of the vessel intersect the branches (which go to the center of the tree) makes for interesting and often symmetrical knot shapes. When turning NIP end grain, keep in mind that when you cut against the direction of the wood fibers, you will end up with sawdust. Cut in the direction of the fibers and you will (or can, at least) get lovely curls and ribbons many feet long. That being said, there is nothing preventing turning cross-grain and ending up with a great result. As far as the knots go, the result turning side grain is less predictable-for me at least.

Re: Translucent Natural Edge

#4

Re: Translucent Natural Edge

john lucas

David That's a gorgeous bowl. Very nicely done.

Re: Translucent Natural Edge

#5

Beautiful - wish it was mine!

Bill Howatt

Re: Translucent Natural Edge

#6

Steve Kubien

One drawback...

Steve Kubien

...to living here in southern Ontario is that there is NIP to scavenge. Beautiful work like this example and even some fo the less-fine work I have seen are still gorgeous.

THIS PIECE would be amazing no matter what wood was used. Wonderful.

Re: Translucent Natural Edge

#7

Re: Translucent Natural Edge

Mike Rubes, Apex, NC

Hi David,

That piece is wonderful! I really like the foot treatment on that one. The natural edge really flows nicely as well.

Thanks for posting, I like that one a lot.

Mike

Loves the long, long ribbons from turning NIP in Apex, NC

Re: Translucent Natural Edge

#8

Bill Blasic

Re: Translucent Natural Edge

Bill Blasic

David,

Another great NIP piece.

Bill