Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Excitement in the shop

Posts

Excitement in the shop

#1

Excitement in the shop

Bill Grumbine (Kutztown PA)

Life always seems to be exciting around here. This morning was no different. I went up to the shop to get some things made in preparation for my trip to John C Campbell. I got my wood prepped and on the lathe, got my apron on, and donned my trusty air helmet. I turned it on and snapped the visor down, just as I have done innumerable times in the past. Today it seemed it snapped down a lot more firmly than I had remembered, and a lot louder than I remembered. But you know how it is sometimes hard to remember how something is when you do it so often it is automatic?

Off I went with the wood whirling around. I got a decent surface, a good shape, and was preparing to sand. I decided to remove my helmet while I changed a few things around. I grabbed hold of the visor and began the motion of snapping it into its up position. It did not move. I grabbed it with both hands and yanked.

IT DIDN'T MOVE!!! :O :O :O

I'M TRAPPED!!! I CAN"T GET THIS #@$%&^&* THING OFF MY HEAD! I'M GOING TO DIE WHEN THE BATTERY GOES DEAD AND MY AIR RUNS OUT!

So now I'm running around the shop tugging on my head, trying to get this air helmet off. All I could think of was when the dog got his head stuck in a large tin can and went beserk trying to get it off. It was funny then. It wasn't so funny this morning.

After all sorts of yanking and tugging, I got it off my head, along with my glasses and some hair, of which I do not have much to spare. Upon examination of the helmet, I discovered that the little button that snaps the visor into position has worn smooth over the past 12 years, to the point where today, the visor just slid right over it. So now I am turning with the helmet very carefully, and looking forward to Monday (for a change) when I can get a spare part ordered.

Re: Excitement in the shop

#2

Jim DeLaney, Austintown, Ohio

Re: Excitement in the shop

Jim DeLaney, Austintown, Ohio

Man, I'd have loved a picture - better yet a movie - of that! :D :D

Jim D.

Re: Excitement in the shop

#3

Steve Kubien

Re: Excitement in the shop

Steve Kubien

Oh how I wish there was a youtube video of this. Glad it all worked out.

Re: Excitement in the shop

#4

Re: Excitement in the shop

john lucas

I agree with the other two. Perhaps I could bring my video camera up there and we could stage it. :)

Re: Excitement in the shop

#5

Re: Excitement in the shop

Tommy Holmes from NW FL

I thought this was going to be a story about mice and skunks taking revenge on you but this is better than anything I was imagining. I don't know know that I'll ever forget the image I have in my head of you trying to get that helmet off your head.

Re: Excitement in the shop

#6

Re: Excitement in the shop

Harry in Beautiful Downtown Kulpsville

Bill, pictures of that could have been your third video! And, I'll bet it would have been a money maker.

Re: Excitement in the shop

#7

Dick Hines

Re: Excitement in the shop

Dick Hines

I would have given a weeks bay to see that. HO, I forgot I don't work anymore so I don't get a weeks pay. Stiil I would have liked to have seen you running all over your shop.

Easy on the hair there too Dude.

Re: Excitement in the shop

#8

Re: Excitement in the shop

Cyril Griesbach

I'm really sorry, Bill, but I just can't stop laughing as I visualize that story. :D

Re: Excitement in the shop

#9

Re: Excitement in the shop

Carol Reed

Don't ever tell anyone you can't dance. Now we know better! :D 8) :b :D ;) :\

Thanks for the confession. Excuse me while get cleaner for the keyboard. What a picture!

Re: Excitement in the shop

#10

Re: Excitement in the shop

Bill Grumbine (Kutztown PA)

Tagged onto John's comment here, but to everyone. SWMBO suggested that we "recreate" the incident while she was up there filming my skew video. I declined, although you never know. We might have to do an historical, hysterical, histrionic re-enactment one of these days. ;)

Re: Excitement in the shop

#11

Mike Stafford

Where's the video?

Mike Stafford

Re: Excitement in the shop

#12

Re:Dang- I'm sitting at a computer in.....

JamieDonaldson

...the AAW office in St. Paul and almost spit coffee all over their screen while reading this post. The visual images were quite clear, and where is that hammer gadget they use for escaping from a car trap by breaking the window? I can visualize Bill standing frozen in place with hammer in hand, trying to decide whether or not to hit himself in the face!

Re: Excitement in the shop

#13

Re: Excitement in the shop

Bill Grumbine (Kutztown PA)

This air helmet may turn into the old colonial axe joke - three handles and two heads and it is still going strong. I have calls into the place where I bought it and 3M warranty and repairs. I may have to replace the hard hat itself. If that happens, there will be nothing left that is original to my helmet that I bought way back in 1997. But if that is the case, I will gladly pay it. This thing has protected my face and my lungs more than I can say.

Re: Excitement in the shop

#14

Re: Excitement in the shop

Galen Vetterick

Bill

Better look for a surplus aircraft canopy ejection system as backup removal while your shopping!

:>)

Galen