Man, did I have fun today...
Steven Antonucci
I started this morning with two must do's and one nice to do...
Must do #1:
I have been working big lately, and I needed to make a steady rest. I have had most of it in my head, and I finally got around to making it today. I made it from skate wheels and leftover shop scraps. I wanted to get to use it, but wouldn't you know it, I came up one lag bolt short of having all of the parts...
Must do #2:
I ran out during the week to buy some chunk anthracite coal. Wife was going out to Wally World and I gave her a $10 budget for a hair dryer to act as a blower for my forge. Wouldn't you know it, but the hose to my shop vac is a perfect fit to both the hair dryer and the blowepipe? Started a fire with some wood cutoffs and then slowly added anthracite...and then started feeding the fire with air from the hair dryer. After a few minute, she comes to life.

I know enough about blacksmithing to fill a thimble. However, I do enjoy swinging a hammer. The lady at the coal store told me that I'd get about 13,500 BTU's out of it, but the blacksmith forums I read put that into more understandable terms- about 3500 degrees! Here a small bit of metal that I was messing around with. (I actually burned the tip off!)

How hot it hot? Well, at that distance, the glove began smoking, and the spring to the visegrip failed (It softened, but I fixed it). Within 20 seconds, I attain welding heat, and the metal sparks like it's the Fourth of July!
The entire setup was about $50 in parts, and works really well. I'll be incorporating some metalwork into future turnings, so who knows what direction I'll be going next?
Fun, fun fun 'til daddy takes my hammer away...
Steve




