Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Are you a Demonstrator?

Posts

Re: Are you a Demonstrator?

#26

Re: Are you a Demonstrator?

Mac Ray

>Where in Maine Keith,missed your demo at our club last time.............

Re: Are you a Demonstrator?

#27

Re: Are you a Demonstrator?

Don Orr

>I do a few demos a year for the local clubs. Nothing special, usually just basic projects and techniques. I have demoed at our local symposium a couple of times and taught Basic Bowl Turning for the local woodworking club. I have had beginners come to my shop for some informal tutoring too.

Demos are fun especially if you have no trouble talking in front of people. My problem can be talking too much or getting sidetracked. ;)

Re: Are you a Demonstrator?

#28

Re: Are you a Demonstrator?

George Guadiane

>I have done a couple of "Autumn In Austerlitz" (NY) events, turning tops and stuff down the road from my house. It's always fun to watch people who ahve never seen turning and how easily fascinated they become.

I have also done some local club demos and I have been blessed to get a few chances to demo at the AWA Totally Turning symposium.

I do one on what I call "OATS" (Off Axis Triangle Segment) turning. The hard part is cutting the triangle staves, so I built a sled which makes it safe, easy and precise enough for the project. All of that is presented and documented, along with a live glue up of the blank and all of the concept steps to get to completion.


And one on (ALMOST Foolproof) bandsaw segmenting. This process ranges from using a single piece of wood to segment and assemble to using two or more pieces. Again, lots of props to insure concept understanding.


Both are comparatively low tech concepts, accessible to anyone who has the tools and desire. Most of what I want to get across is the thinking part (I am not a particularly skilled turner). I touch on design and how to use the blanks to best show off the blank construction and the wood.

MOST of what I do seems to be hollow forms, but the bandsaw stuff really lends itself to bowls too.

Re: Are you a Demonstrator?

#29

You are TOO HUMBLE Don!

George Guadiane

>I must have finished my post JUST after you.

Your demos may be on "the basics," but they are well researched, well considered and VERY well presented (makes them special in my mind). We did a "learn and turn" swap a while ago, at your shop, where I learned a trick that saves me uncounted time in finishing and improved MY turning quite a bit.

I have attended numerous of your demos over the years and be assured that I will continue, because I usually learn something and you remind me about and reinforce the things that we ALL need to be safe and keep turning fun.

Re: Are you a Demonstrator?

#30

HAWAII???

George Guadiane

>I can ALWAYS use another good reason to go to Hawaii. When everything is nailed down, please let us know the where and when.

Re: Are you a Demonstrator?

#31

Peter Charles Fagg (UK)

Re: Are you a Demonstrator?

Peter Charles Fagg (UK)

>Yes, is the answer to the main question. After taking a course with the AWGB (Association of Woodturners of Great Britain) last year I have bookings for 3 local clubs this year where I will do something different. We are all familiar with a demonstrator turning for us well, I don't! Since the majority of turners are doing it for entertainment I describe how everyone could make a set of napkin rings in one day. Nothing too adventurous!

Then I have a quiz with a cheap and an expensive prize, and to complete the evening try and answer questions from the floor and give out some tips and tricks.

I am unsure of the situation over the pond but the general impression in the UK appears that people attend a demo to be entertained and that is what I try to do.

I rarely tell jokes because I can either remember the punch line or the beginning but not both!!!

Warmest Regards, Peter.

Re: Are you a Demonstrator?

#32

Peter, you clearly have not ...

Ed Moore in SW VA

>been trained by Allan Batty. He tells even more jokes than I do in a demo. :D And his jokes are often aimed at Stuart. :D :D

I measure the success of a demo in a simple way. If I do a demo on making widgets, then a demo is very successful if the audience makes a lot of widgets before the next meeting. I taught an ornaments class at John C Campbell in November. I feel that it was very successful because of the pictures I have received from the students of the many ornaments that they have made - and the ornaments aren't just copies of mine.

Respect the bandsaw,

Ed

Re: Are you a Demonstrator?

#33

Re: Are you a Demonstrator? Definitions

Russ Fairfield

>It depends on what you mean by demonstrator.

You are a "demonstrator" if you are an old guy who likes to talk about woodturning anytime you can find somebody to listen.

You are a "big draw demonstrator" if they pay you to listen.

You are a "successful demonstrator" if they stay awake, nobody talks, they all come back after lunch, and nobody asks for their money back.

I have been asked to do demonstrations by people I have met here on Wood Central, and have worked that into 5 woodturning trips around the US. Some have even invited me to come back.

Many of those whom Carole calls the "big draw demonstrator" have priced themselves out of all but the Symposiums and huge club market. That leaves a large market for the rest of us who have similar skills to share, but are willing to work for less.

Re: Are you a Demonstrator?

#34

Keith Tompkins

Re: Are you a Demonstrator?

Keith Tompkins

>Hi Mac, I'll be at the Woodturning School in Damariscotta for three days. Sorry I missed you!

Re: Are you a Demonstrator?

#35

Keith Tompkins

Re: HAWAII???

Keith Tompkins

>HI George! Sounds like fun, doesn't it? I have to agree with you, Don Orr does a great job demoing!

Re: Are you a Demonstrator?

#36

Re: Are you a Demonstrator?

Bill Grumbine (Kutztown PA)

>Peter, of all the demos I have done, I think I have told a total of three jokes. They usually go over with the grace of a Led Zeppelin. I do, however, tell lots of stories, most of them true. And I make the occasional awful pun, which is guaranteed to get a huge groan out of the audience.

Re: Are you a Demonstrator?

#37

Re: HAWAII???

George Guadiane

>Keith, I've been to Hawaii more than 30 times and hope to move there in 2012.

Having said that, I would love to see how you are received there too...

I STRONGLY recommend that you find a way to make it a minimum of two weeks. It takes a long time to get there (and back) and there is plenty to do while you're there.

OH, ;) and I'm tired of telling you how good YOU are, for me (and everyone else I know), it's a given... Don does still need some support and encouragement.

Re: Are you a Demonstrator?

#38

Re: Bill- the occasional awful pun! You .....

JamieDonaldson

>... subject your audiences to avalanches of punishment! (;-D) I don't think I have figured out how to apply these built in smilies yet? ;) AAhh-hhaa- they work by clicking rather than drag and drop! Success!

Re: Are you a Demonstrator?

#39

Re: Are you a Demonstrator?

keith zimmerman, Normal, IL

>I have demonstrated several times at both my local clubs, and, as a fill-in at another club. I generally demonstrate what I turn, but have been asked to step outside my comfort zone a time or two and demonstrate something new to me. I kind of enjoy that as it forces me to learn something new.

keithz

Re: Are you a Demonstrator?

#40

Keith Tompkins

Re: Are you a Demonstrator? Definitions

Keith Tompkins

>Hi Russ, I've been known to work for wood!

Re: Are you a Demonstrator?

#41

Re: Are you a Demonstrator? Definitions

Russ Fairfield

>Keith, sometimes wood is better than money.

Re: Are you a Demonstrator?

#42

Re: Are you a Demonstrator?

Cyril Griesbach

>I have demoed several times at our local club and other events. My first demo was an off axis figurine described in a German turning magazine which my friend thankfully translated for me. Some photos, drawings and a general translation was all I had to enable me to LEARN to do the project. Needless to say I spent a large amount of time preparing but the demo went well and I got a lot of compliments. Since then I've done some others and the demo butterflies have subsided to a manageable level but good preparation is certainly the key to success and I found doing a demo enjoyable.

Re: Are you a Demonstrator?

#43

Don Pencil

Re: Are you a Demonstrator?

Don Pencil

>Demos and/or insruction. "Have bowl gouge will travel".

Pretty much anytime, anywhere. I normally demo for free as long as there is not to much "out of pocket expence" involved.

No spindle. Green bowl, hollow vessel, buff finishing. All on faceplates. No art enhancements. I leave that to Molly, Andi, J. Paul the their like.

I have often done school demos. Usually once per semester at a school. Students love turning demos. I have often done store openings and promos as well as symposium vender booth demos.

I enjoy working with youth the most.

Here are some favorite and fun photos.

Be Well, Don


Re: Are you a Demonstrator?

#44

Katherine Kowalski

Re: Are you a Demonstrator?

Katherine Kowalski

>I love to demonstrate for clubs and at symposia, it's a lot of fun for me! I'm very thankful for my background as a Master Fiber Artist, because it's led me to a distinct woodturning specialty, (fiber arts tools), which very few others seem to demonstrate.

Thus, I can create an entertaining and information-packed session and attendees are inspired to create crochet hooks, etc. themselves. (Annnnndddd... best of all, they get to involve their spouses in the creation process. (The spouses/crocheters/knitters, etc. often attend my demos as well!)

Woodturning is a huge passion of mine, so I travel a lot, but I enjoy every minute of it!


Re: Are you a Demonstrator?

#45

Thanks, everyone

Carole Valentine

>It was interesting. I thought there were more WC folks demonstrating...maybe they are just shy. :)

Re: Are you a Demonstrator?

#46

Re: Are you a Demonstrator?

Barbara R Dill

>No, I'm not Barbara Gill, although I know and love her. We are both Virginians. I just got started being a part of Wood Central and I'm loving it. (I could get addicted). I love the question and the responses. I've been doing many local, regional and state symposium demos after working on a conceptual model regarding multi axis spindles. I had hoped to be at a national symposium but have not been selected thus far. I do love teaching and have taught at the Visual Arts Center here in Richmond for about 9 years. Like Rob Wallace, I think teaching involves teaching folks how to think, as well as showing how to do. Also, I have found that teaching helps organize the process, so that I can be better at presenting the material. I now have a power point presentation that helps keep things in line.

I hope we keep the state symposiums for a stage for all the wonderful and tallented local turners who have not broken through yet.

Re: Are you a Demonstrator?

#47

Keith Tompkins

Re: Are you a Demonstrator?

Keith Tompkins

>HI Barbara, I enjoyed the images of your work in the latest issue of the AAW mag. I believe the turners/demonstrators who teach conceptual rather than technical programs have a much tougher time breaking through into the higher levels. I once had a AAW board member remind me that design demos just don't work, especially at the national level...several had tried and failed. And, a failed demo at that level will put an end to that career. That was a real ego booster! Luckily, that attitude is changing, and I believe the door has opened for demonstrators such as yourself and Rob. BTW, my design demo in Louisville was PACKED, and I had to send my wife to Kinko's to print an additional 660 handouts! (That handout can still be seen on the AAW resource page) don't dismay...your day is coming!

Re: Are you a Demonstrator?

#48

Re: Are you a Demonstrator?

Barbara R Dill

>Keith.I love your work and appreciate your optimistic commets. Thanks for the note.

Re: Are you a Demonstrator?

#49

Don Pencil

Re: Are you a Demonstrator?

Don Pencil

>Hey!!!

What's all this talk about being a virgin on the woodturning forum?

I thought this was a "G" rated family kinda forum.

What has that got to do with woodturning? :\

Don ;)

Re: Are you a Demonstrator?

#50

So Are You George !

Don Orr

>Your demos are equally well done, but thanks for the pat on the back. And thanks to Keith too-who was lucky (?) enough to sit through my first Totally Turning demo.

I learn something from every demo I attend. An excellent piece of advice I was given early on was to go to every demo I could whenever I could. It has proven to be good advice.