>I guess we are all familiar with the "big draw" demonstrators, but what about the rest of you? Do you demonstrate (or teach)? If so, at what level - local club, state, national? How long have you been doing it? Do you rely on particular types of turnings for your "bread and butter" (example: bowls and utility items) and another type for your demos (examples: hollow forms, enhancements, eccentrics)? WC has a large membership and I am just curious.
>I am not a big draw demonstrator either, but I do have my local fans. We don't really have a close by big population base, so local demos are all I get to do. There was the exception when the AAW had their Symposium in Portland a few years back, and I got to demo bowl coring systems. It was fun, and I will apply for 2012 when they are out west again. Mostly, bowls, but I do boxes, and hollow forms. Mostly, I like to demo the different toys we use, in more of a tool review than how I think things should be done. I may work up to a sharpening demo as well. I haven't used my gouge jig (Ellsworth) in over a month as I found that it is easier to use an angled platform for all my gouges. Demoing and teaching is as much fun as the actual turning. To see that light bulb come on, and inspired look of understanding is great.
>i'm not a big name demonstrator either; however, I've demonstrated twice at AAW Symposiums, Once at the Utah Woodturning Symposium, at most of the clubs in Western Washington and Oregon and British Columbia and a couple of places in Florida. In addition, I've demonstrated at a number of places in England, Ireland, Scotland, Wales, New Zealand, and Australia as well as the Norwegian Woodturning Curise in 2004. My primary demonstration is the making of the Chinese ball, Hand thread chasing, making wine bottle stoppers, and oval hammer handles.
>I did my first demo for the TAW many years ago. Now that I look back on it I was pretty bad. However the new turners probably learned something. I was talked into doing it. We all need to share. The demo's don't have to be spectacular. Most people are interested in a project that they can go home and attempt.
I've found the best thing is to talk constantly. Tell them everything you are doing and why no matter how little. For example if you make a cut down a bowl and you rotate the flute a little, why. Explain why you do that, or why you are using a push cut, talk about grain direction, tearout etc. Anything that you've struggled with in the past and managed to find a solution will be helpful to the beginner.
After my first demo I decided I wanted to improve so I would volunteer to do another one and this time I would plan a little more. I did walk through's at home going through the whole demo and asking myself what I can do to make it better or keep it within the time constraints, etc.
Now after many years of doing this I do a demo just about once a month somewhere. We have a fairly new club locally so they depend on 3 of us to alternate doing the demos. I'll be doing at least 4 more around the south this summer and will be doing the AAW symposium for the 3rd time. It's always fun when I do them but a little nerve wracking getting ready because I do a lot different demos and have to remember to bring all the proper equipment.
>I am not a "name" and I do not try to attract more opportunities, but I do occasional local demonstrations. I prefer to teach. It takes a lot of preparation for a demo and it really isn't cost effective. Lately the demonstrations have focused on ornaments, icicles, and tool use.
My course at JCCFS in May will be Ornaments and Boxes. The boxes will have inset lids rather than the usual format where the bottom has a tenon.
>Demonstrating and teaching are probably my favorite parts of turning these days. Like Robo Hippy, I really enjoy helping people get excited about a new hobby, or helping them learn or refine a new skill.
I've mostly been doing local club demos for the 3 turning clubs I've been active in, as well as regional symposia like the New England Woodtuning Symposium, and Totally Turning in past years.
My standard topics are Hollow Forms, Turning Green Wood, Ornaments, Hook and Ring Tools, and just about any aspect of bowl turning. I have also done tree identification walks (often associated with Turning Green Wood) and Finding and Using Small Burls. As the demo coordinator for the local club, I'm often in the on-deck circle, and if there are any scheduling screw-up's, I am available to demonstrate at the meeting.
In addition to teaching and demonstrating, which is a ton of fun, I've also met many really interesting people, including some of the Big Shots, through demonstrating. I've been lucky enough to meet, have dinner and drinks with, and generally hang out with a number of household-name turners at symposia, including many whose tools and books and video's we collect, and whose pieces I wish I could afford to collect!
Ive taught many topics over the years, from 35mm black & white photography, to astronomy (no "L"), and telescope making, and other things (mostly in the sciences), and I must say, one of the best ways to really learn something is to step up and try to teach it -- if you care about doing a good job, you'll push yourself to a much deeper understanding just to be prepared for questions and to feel confident. Teaching and demonstrating is a great challenge that maybe more should take on.
>....and doing demos to be the same- teaching? I have been teaching several subjects, mostly photography related, since 1967. And during the 24 yrs. that I've been turning, I was fortunate to be able to study with many big name and small name turners, assuming the position that I can learn something from everyone. I now feel a commitment to share what I have learned, because knowledge hoarded has no value unless it is shared. I've been a demonstrator at 5 AAW Symposiums as well as several regional symposia, and travel for 6~8 AAW chapter demos per year. I've founded 2 chapters, and have also enjoyed being an Instructor several times a year since 2003 at the Campbell Folk School, where I took my first turning instruction in 1986. Since my wife's death 2+yrs. ago I look forward to keeping busy and on the road, and the journeys are both enlightening and entertainment.
For the past few years I have been doing several local demonstrations on a range of topics that interest me: complexity and diversity of wood, geometry of woodturning, basic vessel design concepts, ergonomics and lathe station design, etc. as well as demoing basic turning skills. A year ago I combined four talks into a day-long demo for the Loess Hills Woodturners near Omaha. My demos are a combination of Powerpoint presentations and turning demonstrations, and some are fairly "academic" and teach "theory" as opposed to being project-related and "how to do it" - My emphasis is on not just showing how techniques are done, but WHY they are done. For the past four years I've applied to demo at the AAW symposium, but have not been selected - perhaps the proposed demos are TOO academic and theoretical? I don't know because all I have ever received as feedback is a "thanks but no thanks' response from the AAW without any comments. Frustrating.
I am asked each year to give a turning demonstration for our local high school woodworking classes; the woodworking teacher arranges for all of his shop classes to be able to watch my turning demo, which means I have an annual audience of between 50 and 70 high school kids, all being exposed to woodturning. Turning has become very popular in these classes; there are long waiting lists for these kids to get time to work on the 4 lathes in the HS woodshop! It is really fun to see and hear them comment when I shoot ribbons of wet maple off the gouge onto the kids in the front rows! I am now recognized by a few of these kids who work in local stores and hardware shops as "that woodturning guy", which is my sole claim to fame. I also do public turning demonstrations annually at our local community art festival each September, and have been asked to demo woodturning at other local art and natural history activities.
>I've been doing woodturning demos for around 15 years. Mostly for local wood/tool stores, our AAW chapter, and at the Midwest Penturners Gathering. I did a demo, one year at the AWF in Anahiem, Ca. Teaching for about the same time, again at the local places. I've done demos and taught at the local stores for flat woodworking longer. I did one regional demo at a Woodworking Show in St. Louis. I have to throw all the pages, and a couple covers, for Woodworker's Journal. I was the project builder/designer at the magazine for 3 years.
>If you really want to understand how something works, try to teach it to someone else. If you're really serious about it, you must first break it down into the simplest of tasks before you can put them all together. It's like reversing everything you've done.
I've been a woodturning instructor and demonstrator in the New England area for several years now. It's a lot of work, and it's often not easy, but I enjoy every minute of it! Like someone pointed out in this thread already, you can see when the lightbulb goes off in their head, and it all starts to click. That's when it makes it all worthwhile!
>HI Carole, I've either taught or demonstrated in quite a few states and in Canada. My biggest problem is that I'm still employed full-time, so I must turn down many of the requests I receive; maybe after I retire, I'll do more. I'll be going to the UK after the AAW symposium; I'm scheduled to teach, do some club demos, and perhaps shoot my first DVD. This will be my first trip across the pond for any reason. Labor Day weekend will be back to Maine, one of my favorite places. I've been invited to demo in Hawaii in 2011, so plans are in the beginning stages. I'll be doing four rotations in Hartford, that will be my third time demo'ing at a national event. My favorite topic to teach is design.
For the past two or three years I have been asked to do half-demos involving ornaments. I usually do the second half, after the break, when people are tired and ready to go home. Since I am in two clubs, SMLW and BRW, and the demos have been for them I try to be accommodating and supportive. Two weeks ago I did a half demo for one of the clubs and despite a lot of preparation on my part, time slipped away and I had only about 35 minutes. Tonight at the other club I was absolutely astounded when someone unknown to me came up and raved about how much they had gotten out of what I had taught in that short half-demo two weeks previously.
The differences. When you do a demo someone else is in charge of the meeting and you try to work within their parameters. When I teach a class at JCCFS I set the parameters and have more control over the time and topics. This was only partially true when you were in the class due to some strange dynamics that did not involve you. But it was true when I taught in November when the dynamics were more normal.
On the Saturday of Labor Day weekend I was to do an all day presentation for a club not too far away. I was really looking forward to that time with some friends and the opportunity to show a lot of what I like to do. The Tuesday before the demo I cut my hand on the bandsaw and a demo on safety was done by some others instead. A few months later a member of the inviting club happened to attend a meeting of BRW when I did the second half of a demo. Since I have had no follow-up contact with the inviting club since, I have taken the hint and do not expect to hear from them. My point is that doing a half demo may erode one's credibility.
I realize that a demo is a teaching opportunity and I try to teach as much as I can when doing one. But I usually feel torqued around to accommodate the club's request when doing a demo, and feel that the situation is not always optimal.
>A few times at the club, quite a bit one-on-one and for two or three, sometimes for larger groups of kids. Mostly small things, wands and tops, beginner instruction, techniques.