Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

hunka-hunka big leaf maple

Posts

hunka-hunka big leaf maple

#1

hunka-hunka big leaf maple

Carol Reed - Strawberry, AZ

>Dave Smith gave me a loverly piece of big leaf maple with tons of chatoyance. It is less than 2" square and about 10-12" long. (Its out in the cold, cold turning shack and I ain't going out there right now!)

I am trying to decide what to make with it. I have decided it will be the first turning on the new lathe.

Any suggestions?

I also just got a spindle gouge from Doug that needs a handle. I have thought about using this piece of wood. But it is so purty, that making a tool handle seems a little frivolous.

On the other hand, the lathe is new. The project should be special. Dave and Doug are really cool guys. That wood is really super.

I do have other handle wood that is nice.

So I am open minded for this particular piece of wood.

You all lived with me getting this lathe, so what says the collective brain trust?

Re: hunka-hunka big leaf maple

#2

Re: hunka-hunka big leaf maple

Carole Valentine

>Decision, decisions! LOL I have news for you...it never ends.

How about a pretty little box? A mini HF, maybe? Or how about a beautiful custom handle for the lockdown on your banjo or tailstock on your new Jet?

Re: hunka-hunka big leaf maple

#3

Steve Kubien

Re: hunka-hunka big leaf maple

Steve Kubien

>I would go with the handle for the spindle gouge. It is something you will use all the time, see all the time so it might as well look good, all the time.

IMHO

Re: hunka-hunka big leaf maple

#4

Re: hunka-hunka big leaf maple

Barry Irby

>I think Steve has the right idea. The handle will be something you use every time you turn. A thought would be to make it an eccentric turning so you can feel the position of the flute.

Re: hunka-hunka big leaf maple

#5

Re: hunka-hunka big leaf maple

Donna Banfield

>My vote would be for the handle, too.

Doug's tools are superior, IMHO, to most others, and deserving of an equally superior custom turned handle.

Re: hunka-hunka big leaf maple

#6

Re: hunka-hunka big leaf maple

Dave Moore

>hmmmm

For myself I get more satisfaction from making things for others than for myself. I use cottonwood for all my handles and never sand them or apply any finish since I prefer the way that feels. I spend more time feeling them than looking at them anyway, so pretty wood never goes into handles at my house, they are relatively rough and would not do justice to gorgeous grain or color.

When I finally got the lathe that will last me forever, the first thing I made was a small applewood bowl as a gift. It just seemed right at the time.

You do seem to have settled on a handle-shaped blank for the maiden voyage however, so I don't know. Some turners love beautiful handles on their tools, and good for them. Doug's tools are certainly worthy.

Re: hunka-hunka big leaf maple

#7

Re: hunka-hunka big leaf maple

john lucas

>It would make great ornament balls. You could make a lot of them for gifts. Great small lidded boxes. However if you make the tool handle you'll remember the gift for a long time.

Re: hunka-hunka big leaf maple

#8

Re: hunka-hunka big leaf maple

Kurt Bird

>Carol, sometimes we all overlook the opportunity to do something special for ourself - I say turn the maple for a handle. You will be glad you did every time you use that tool. It will pay itself back to you for a lonnnng time!

Re: hunka-hunka big leaf maple

#9

Steven Antonucci

My two main gouges are birdseye maple

steve antonucci

>with the same logic applied. Why not have something you use every day be more than just a stick?

steve

Re: hunka-hunka big leaf maple

#10

Pepper mill?

Jorge Castaneda~Downeast Maine

>Carol,

with a little ingenuity you can make that stick big enough to turn a pepper mill for yourself, maybe a salt combo, something you will use everyday.

That is a special project for a special piece of wood, from a special tool for a special lady...

Just a thought.

Jorge

Re: hunka-hunka big leaf maple

#11

Re: hunka-hunka big leaf maple

Barry Turner

>That amount of wood would keep you turning for weeks on end...........

Re: hunka-hunka big leaf maple

#12

Re: hunka-hunka big leaf maple

Harry in Beautiful Downtown Kulpsville

>A small lidded box would be my preference. As close to 2" diameter as you can get and maybe 2-1/2" high.

Re: hunka-hunka big leaf maple

#13

Re: hunka-hunka big leaf maple

Ed Heuslein

>Howdy Carol: Well, I'm gonna disagree with most. Tools are just that. Tools. Quick and dirty handles work just as well as pretty, fancy handles. Instead, use the pretty BLM for something special. Make some ornaments for someone special (including yourself). Perhaps a small box with an ebony finial? Even a simple weed pot will generate many questions as it sits on your livingroom coffee table. Now you know why I'm knows as PITA in my local club. ;>} Let us see what you finally make.

Re: hunka-hunka big leaf maple

#14

Sorry to cause soooo much trouble.

Dave Smith, Longview, WA

>Hey Carol,

You can do what ever you want with the BLM. Personally I like heavier wood for handles. To show off the figure I would make a couple three small boxes.

Dave Smith

Braving solar radiation in Mesa, AZ.

Re: hunka-hunka big leaf maple

#15

Re: Sorry to cause soooo much trouble.

Carole Valentine

>Doesn't look like she liked any of our suggestions, Dave! LOL Either that or she is trapped under a pile of Strawberry shavings. ;) Maybe you should go check on her!

Re: hunka-hunka big leaf maple

#16

Coming up for air...decision for hunka hunka BLM

Carol Reed - Strawberry, AZ

>Not buried in shavings, sorry. Buried in work!

The hunka hunka will become a salt and pepper shaker set. It will grace the dining room table always to remind me what good friends I have. Thanks again, Dave. Sorry I haven't responded sooner.

I have some OO from Indy Fest that will become the handle. Other good friends and good wood.

Lathe electrical circuit is in. I had to return to another job for a bit, so the toy awaits me. Next is clear out the turning shack. I have decided just how it must be placed so I can get in the door too! But alas, that will have to wait until next week. The end of most people's week is when my 'day' job begins.