Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Oneway Big Bite Spur

Posts

Oneway Big Bite Spur

#1

Oneway Big Bite Spur

Mike Brazeau

>I was making arrangements to tour the Oneway factory near the end of November with a turner from BC that was touring SW Ontario. I noticed this spur on the Oneway Homepage and made arrangements to pick one up during the visit. Have been wanting a two point spur for ages. Finally got around to trying it this week and it worked out really well. As able to tilt this piece of ambrosia maple very nicely to line up the top edges. Hadn't seen any mention of this before anywhere, so thought I would bring it forward. Very reasonably priced and like all Oneway products, well made. No connection to Oneway, just a very happy user.


img

Re: Oneway Big Bite Spur

#2

Mounted in Stronghold Chuck jaws

Mike Brazeau

>The Big Spur slides between the jaws of the chuck when mounted. Worked really well on the heavy bark of the silver maple.


img

Re: Oneway Big Bite Spur

#3

Re: Mounted in Stronghold Chuck jaws

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>I picked up one at the woodturning symposium in Ohio. And am I impressed. I was trying to turn a piece of punky Big Leaf Maple burl -- so punky it would not even hold screws. The spur held it perfectly between centers (after other spurs buried themselves). The piece was so rotten that I had to stabilize it with Polyall 2000 to keep it from turning like a piece of styrofoam. But the color was spectacular, and worth the extra work.

Since then I have used it on many pieces and have been increasingly impressed by its holding power. And it is so simple -- and inexpensive.

Re: Oneway Big Bite Spur

#4

George Balock

Re: Oneway Big Bite Spur

George Balock

>Mike,

Thanks for the information. I ordered one just before Christmas, so it should be in my hands by New Years,

Re: Oneway Big Bite Spur

#5

Will it fit in a Nova chck??

Ed Larson

>

Re: Oneway Big Bite Spur

#6

Re: Will it fit in a Nova chck??

Mike Brazeau

>The projection you see at the top in the first picture is 1/64" under 1" in width and 21/64" high. That fits into the center portion of the chuck to stabilize it from side to side and help center it with respect to the chuck. Don't have a Nova to measure. Oneway says it fits in all their chucks. I was using #2 jaws in Stronghold. Mounted a 15" blank this afternoon and it was excellent again.

Re: Oneway Big Bite Spur

#7

Roger in MO

Re: Oneway Big Bite Spur

Roger in MO

>I "googoled" one way big bite spur and a great photo of the spur came up. Perhaps others are not familiar with it--I wasn't.

Who stocks these? I couldn't find any ordering info on One Way's web site.

Thanks for posting.

Roger in Mo

Re: Oneway Big Bite Spur

#9

Ken Vaughan

Re: Oneway Big Bite Spur

Ken Vaughan

>I email them the order or call -- there was not a web page order form last time I looked

Re: Oneway Big Bite Spur

#10

Roger in MO

Re: Oneway Big Bite Spur

Roger in MO

>Thanks for the info. I'll make that call. Roger

Re: Oneway Big Bite Spur

#11

Re: Oneway Big Bite Spur

ThomD

>What a hoot, I always put them down as the guys behind the safety drives!