Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Mantaray leather

Posts

Mantaray leather

#1

Mantaray leather

Tery Scott

>Manta ray leather

this one is 550 mm square sitting on my signature three feet.

The carving to the winds was done by a fluted carving tool ,took me a life time to sand all the tear out in the Ancient kauri as the grain went all over the place .

The under cut on this one was a challenge as it ended in a v and kauri just doest like being scraped.I suppose I wouldn't either if I was 34000 years old

The finish was my boot polish effect sanded back with a 3 m buff so the wood showed through to give an aged look then lacquered.

Every one walking passed this piece had to stop and run their hands over it as the tactile leather look and feel was very soothing

This piece resides in a collection In Canada

These works are a test to ship as the wings tend to take the brunt of This was the last of the three in this series made ,posting this has got my juices flowing to maybe start another

This work won best large bowl in the Royal Easter show

Comments welcome


img

Re: Mantaray leather

#2

Re: Mantaray leather

david

>Tery: The tactile qualities are certainly evident, but what I like most about this piece is its elegant simplicity and width to height proportions. Well deserving of an award.

Re: Mantaray leather

#3

Re: Mantaray leather------WebKitFormBoundarydq0T2d

JackSavona------WebKitFormBoundarydq0T2ddSn+ezi7Ok

>Terry, I totally admire your work, and this piece is no exception. I, too, would want that tactile experience of holding your turning. The wings seem to flow so exquisitely. Even the detail in the rim fits so well. Do you sketch out your work beforehand or is it an intuitive process?

I just can't figure out where you eek out the time to do all the quality work you do. Do you have another occupation??? Do you sleep??? Have you figured out how to get more than 24 hours out of the day? What the heck is your secret for being so prolific...and so 'perfect' (Although I realize how YOU may see your work differently.). The proportions work so well. Do you sketch out wour work

Somehow you have managed to make woodturning with embellishments visible as woodTURNING with embellishments. For me you have brought a new level to woodTURNING creativity and you have been so willing to share your 'tricks' with us.

Thank you!

------WebKitFormBoundarydq0T2ddSn+ezi7Ok

Re: Mantaray leather

#4

Re: Mantaray leather------WebKitFormBoundarydq0T2d

Tery Scott

>Terry, I totally admire your work, and this piece is no exception. I, too, would want that tactile experience of holding your turning. The wings seem to flow so exquisitely. Even the detail in the rim fits so well. Do you sketch out your work beforehand or is it an intuitive process? I am unable to even draw a staright line

When i first started turning I think I was an evolveist know I like to say I am A vissionist yes this even scares me as I can know see the end article before turning and finishing in my head (sometimes the wood has a mind of its own however).Without finding woodturning who knows the artistic bent I have may still be dormant a sad thought.

I have so many ideas in my pee brain that I just wont to put them all into one piece .I work on up to 6 pieces at a time as I get half way and then another idea comes out I just have to start before it goes

yes I am probably sick but I love what I do

I just can't figure out where you eek out the time to do all the quality work you do. Do you have another occupation??? Yes I have a day job and a family

Do you sleep??? Only when I have to l.o.l Have you figured out how to get more than 24 hours out of the day? Funny I thought there were 36 in a day What the heck is your secret for being so prolific...Often asked? just put the gear stick in top gear and never stop creating

and so 'perfect' Thanks but you are right I do look at each work differently but I cannot wait to start the next to correct the mistakes (Although I realize how YOU may see your work differently.). The proportions work so well. Do you sketch out your work no but I take thousands of photos of texture and shapes

Somehow you have managed to make woodturning with embellishments visible as woodTURNING with embellishments. For me you have brought a new level to woodTURNING creativity and you have been so willing to share your 'tricks' with us.

Thank you for taking the time to comment and your honest approach and comments they are appreciated

Have a look at my web site if you havnt already Id appreciate feed back good or bad

Cheers

Thank you!

------We