Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Undercutting the rim

Posts

Re: Undercutting the rim

#26

Re: And another

Jorge Castaneda~Downeast Maine

>Gary,

One advantage from my Thompson gouges besides their own merits, is that I make my handles, and have them long, medium and short for each diameter, I have the Powermatic 3520 and seldom remove the tail-stock, I use the short handle...

Give it a try

Jorge

Re: Undercutting the rim

#27

Re: Undercutting the rim

Joe Herrmann

>I ground the main part of the scraper as you normally would on the platform of the grinder and then just free handed the negative rake part at approximately a 5 degree angle. I looking back, I think I might try to grind it next time with a small Dremel tool instead. It doesn't have to be pretty to work.

I sometimes use a small 1/2" round nose tool and have ground off the top of that as well-- I like the way it works.

Joe