Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Santa Puzzle

Posts

Santa Puzzle

#1

Santa Puzzle

Mike from St. Clair Shores

>This is a fun puzzle that I started making last year. It's based on an old bar bet that involves a hard boiled egg and a shot glass. I make mine with a small chimney and a santa that fits inside. You put it on a table and tell someone that Santa is stuck in the chimney and needs some help getting out. The trick is that you tell them they must get Santa out of the chimney but they cannot touch the chimney, Santa or the table. Most people are dumbfounded and have no idea what to do. You can let them anguish for awhile or just bend over and blow with a sharp puff right at the angle on Santa's hat and he will come flying out. I have been making this puzzle for several years with 2 different color woods but last year I started the Santa one. I am listing it here so that you will be able to make some and have fun with it this Christmas.

Mike


img

Re: Santa Puzzle

#2

Santa Puzzle - very clever!

Ed Moore in SW VA

>Mike,

I have three grandchildren who would enjoy this clever puzzle. In order to make three it would be helpful to know:

1. Does the chimney have a bottom, or is it an open-ended "tube"?

2. What is the difference in diameters of the Santa and the interior of the Chimney? Said differently, how loose is the fit?

Thanks for posting and sharing this neat puzzle.

Respect the bandsaw,

Ed

Re: Santa Puzzle

#3

Re: Santa Puzzle - very clever!

Mike from St. Clair Shores

>Ed,

Thanks for the positive response. I posted it at 1:30 am and after I went to bed I realized that I didn't mention the size of the plug vs the interior of the chimney. The plug you make should be loose fitting from 1/8" to 3/16" less in diameter than the hole. The angled part of the plug is approx. 45 degrees, combined angle of approx. 90 degrees. I say approx. because it works several degrees off either way. The angle on the plug should be at or just barely below the top of the chimney opening, which has a bottom by the way. When you give a sharp puff of air at the plug (perpendicular to it) the air hits the plug and rushes down the inside where it hits the bottom and the plug flies out. I burned the circular rings with a wire and did the brick pattern with a wood burner. when I make the puzzle throughout the year I usually chatter the bottom of the chimney part. Any other questions I will be glad to help.

Mike

Re: Santa Puzzle

#4

Re: Santa Puzzle

Don Tewell

>I must have hung out at the wrong bars. I don't remember that particular bet. That is very cool.

Re: Santa Puzzle

#5

Re: Santa Puzzle - very clever!

Ed Moore in SW VA

>Thank you very much Mike. After reading about the puzzle I googled egg and shot glass and saw a video clip of someone making the egg swap ends.

Ed