Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

To skew or not to skew

Posts

Re: To skew or not to skew

#26

Single bevel skew

keith zimmerman, Normal IL

>Keith, this single bevel skew sounds intriguing. When you grind it, what angles do you grind? I usually use a 25 degree bevel and 70 degree edge. Think these would be place to start?

As far as terminology, hHow do you define right and left hand? I would think a right hand tool would have the bevel on the right side when the long point is down. Do you agree?

I have couple old tools hanging around, so I may just have check this out.

keithz

Re: To skew or not to skew

#27

Re: John, with all due respect, . . .

keith zimmerman, Normal IL

>John, I've switched a couple of my gouges to the Michelson grind and find that I like it a lot. So far, I've done a 1/4" detail spindle gouge and a 3/8" Thompson deep V bowl gouge. I really like both these gouges with this grind. I do all my bottlestoppers and finials with the 1/4" gouge.

I'm thinking about regrinding my other gouges to the same grind too.

keithz

Re: To skew or not to skew

#28

Steven Antonucci

Now I need a spindle gouge

steve antonucci

>The shape of the gouge really makes that cut easy or hard. I need another tool...

S