Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Robust Comfort or Low Profile Tool Rest?

Posts

Robust Comfort or Low Profile Tool Rest?

#1

Robust Comfort or Low Profile Tool Rest?

david

>Thinking of putting one of these on my holiday wish list. From the photos, the "comfort" profile is quite different from the "low profie". Any one have experience with both of these and which one is preferred and why?

Re: Robust Comfort or Low Profile Tool Rest?

#2

Re: Robust Comfort or Low Profile Tool Rest?

Greg Haugen

>David,

What lathe are you using? For smaller lathes, the low profile is best. For Medium to large lathes, the full comfort rest is very nice. If I had a choice, I like the full size rest the best. I don't have small hands and it's very comfortable. Either rest, with the hardened steel bar on top, are excellent rests.

Hope that helps.

Re: Robust Comfort or Low Profile Tool Rest?

#3

Re: Robust Comfort or Low Profile Tool Rest?

Bill Howatt

>Make sure that the tool when placed on the rest is below the center-line of the lathe by some margin that suits your style of working. Great rest, by the way.

Bill

Re: Robust Comfort or Low Profile Tool Rest?

#4

Great choice, they're awesome!

Molly Winton

>Greg's right. It really depends upon the size of lathe you have. You need the low profile for the small lathes. I have both rests because I use them on my Jet mini, 1224, and Woodfast. I don't notice much of a difference in their comfort.

Re: Robust Comfort or Low Profile Tool Rest?

#5

Lyle Jamieson

Re: Robust Comfort or Low Profile Tool Rest?

Lyle Jamieson

>Great point Bill. Any boring bar you use has to end up cutting at the center line when you get into the bottom of a hollow form. So the boring bar needs to be on the center line. So the tool rest must be considerably below center. The bigger boring bar you use, the more the tool rest must be below the center line. This is critical when you start getting into smaller and smaller mouth openings. There are a number of lathes manufactured with factory tools rests that will not let you do hollow forms through a small hole. The Jet 14 and 16 inch swing are two that come to mind off the top of my hat. Some mini's have the same problem. Because of this obsticle I will soon have a micro adjustable tool rest to solve this problem and make it easier to get a captured boring bar cutting directly on the centerline. I am testing the prototype now and will introduce it at SWAT if any of you down that way want to see it. This will eliminate the dreaded nub problem. Lyle

Re: Robust Comfort or Low Profile Tool Rest?

#6

Re: Robust Comfort or Low Profile Tool Rest?

john lucas

>I built a micro adjustable tool rest using a 1" piece of all thread. Weld it to a round bar for the top and put a nut on it. I also have a micro adjustable table that fits in the banjo to use my router on the lathe.