hidden heros
Philip Duffy
>I nominate Myron Cutis for his 1/4in drop-nosed negative angle scraper. That little tool will hollow an ornament quicker than you can reach for a piece of gum, hog off a bunch of wood anywhere and it cost about $3. Phil
Knowledge You Can Build On — Est. 1998
hidden heros
Philip Duffy
>I nominate Myron Cutis for his 1/4in drop-nosed negative angle scraper. That little tool will hollow an ornament quicker than you can reach for a piece of gum, hog off a bunch of wood anywhere and it cost about $3. Phil
coring bowls
mikevermont
>I can't say for sure how long they've been around, but there are some old bowl mills here in VT that have been coring for a very long time. They had sets of corers (sp?) would core out 3-4 bowls from a blank all at once. I believe many of these mills originally ran on water power. I think the last surviving bowlmill in VT shut down a couple years ago. I ran into a wood turner at a craft fair recently that used this old technology coupled with electric motors to core 14-18" blanks into multiple bowls. He only does it for fun in the summer when he is in VT. He said he even sells cored blanks to turners who sell bowls, but don't have the time to rough out a lot of stock.
This technology has been around a long time, but only just recently (relatively) adapted for use on lathes for crafstmen.
Re: Hidden Heroes
bowlman
>And I still have one of the Thompson telescoping boring bars!
Re: History of American Woodturning-Late 20th Cent
bowlman
>Well, this is just my $.02 worth, but ... I don't believe that there is anything sinister going on. In fact, one year, AAW and Dale Nish combined forces for a dual symposium. As for other conflicts, I know 1 year, AAW actually moved they dates of their syposium to avoid any conflict.
Remember, nowadays, the AAW symposium is run by a committee. They do a site search, meet with the operators of that site, discuss dates, and try, TRY to pick one that falls in late June. The first few symposiia were in October, but many folks objected saying that they wanted them to be held in the summer, hence the move to June.
Re: Hidden Heroes
John Jordan
>The AAW book will be just that. In theory at least, and there are a number of knowledgeable people working on it.
John
Re: History of American Woodturning-Late 20th Cent
John Jordan
>And actually, there IS a book. It's called "Woodturning in North America Since 1930" It accompanied an exhibition by that nae in 1991,and it's still available. I would recommend it-there's nothing else even close. It could have gone even farther, but it is a significant, and scholarly publication with lots of good photos. :) The new AAW book will be a good addition to it.
John
Industrial to Small Shop Adapting
charlie belden
>If turning manufacturing is anything like jewelry manufacturing, there are plenty of tools, machines and production techniques that can be scaled down or are applicable to use in a small shop - oval picture frame turning comes to mind in addition to the bowl coring you described.
How much turning technology developed before the small electric motor is sitting in some old building. More significant, how much of the knowledge and skills to use that stuff is sitting in some old craftsman's head waiting to be passed on if the opportunity presents itself.
My jewelry mentor was fortunate to get a lot of old jewelry making equiptment and machines when the largest manufacturing jeweler west of the Mississippi had a fire and closed down. He picked up two big, old, drop forges - tall heavy cast iron guides for the drop forge hammer - with a leather belts attached to the hammer that ran over a big wooden pulley on an overhead drive shaft. And with them, he got boxes and boxes and boxes of steel stamping dies - all hand cut by masters.
Figuring out how to use the forges with the larger steel dies was fairly easy. But the little dies - for making small stamped overlays for Zippo lighters had us stumped.
So Ed went looking for the guys who used to use these drop forges. And he found one old guy, living in a single room occupancy place in San Francisco - sitting in the lobby - waiting to die.
He brought that old man down to his place and reintroduced him to his old friends whom he thought had already "passed on". The reunion was absolutely glorious - visibly making years and years disappear. The he was in his mid to late 70's, proximity to his old familiar friends brought him mentally, and to a surprising extent, physically, back to a much younger man.
Whenever I'm around someone who is enthusiastically engaged in doing something they love to do I get a buzz - a contact high. And this old guy was definitely doing something he loved to do. And I definitely got a buzz just by be present at this reunion and what followed.
Over the subesequent weekends, that old guy told us wonderful stories about he and these drop forges - and gave us tip after tip after tip on how to get the most out of them - including a very simple way to set up and align the male and female parts of small steel dies - so they don't explode on you at the first strike of the hammer.
When he'd passed on most of the important stuff he knew - to someone who appreciated that knowledge and those skills - and in turn would pass them on - the old guy died. It was like he'd been waiting for us - hanging on in the hopes that what he knew wouldn't be lost.
I'm sure there are equivalent old men with a storehouse of knowledge about production turning that are out there - maybe waiting for someone with The Passion to find them - and receive that knowledge - and carry it on.
Know anyone like that?