Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

OT Wood for the winter

Posts

OT Wood for the winter

#1

Roger in MO

OT Wood for the winter

Roger in MO

>Just finished cutting and splitting wood to heat the shop this winter. I'm 73 yrs young so it did take a while. Most of the logs were from standing dead trees, mostly shingle oak. What a joy to split (with a power splitter.) The stack is about 24' long and over 4' high. Average length is 16" so there is at least a cord.

The splitter is one I built from salvage material with a 5 HP engine and a two stage pump. Cylinder is 3x24. This will go through knots with ease and will do a fine job on knarley (sp?) elm.

Thanks for looking. Roger


img

Re: OT Wood for the winter

#2

Roger in MO

Re: another photo 

Roger in MO

>


img

Re: OT Wood for the winter

#3

Re: OT Wood for the winter

Dave Peebles Lyons, Ohio!

>Hi Roger,

That is a good thing to see. My weekend will be spend doing the same. But I have to split mine by hand, that is a nice looking splitter you have there.

Happiness it a good woodpile :)

Best wishes,

Dave

Re: OT Wood for the winter

#4

Re: OT Wood for the winter

Jim Sebring

>I'm doing the same thing but I need about 4 cords. My calculator sez your pile is about 1.728 cords :-)

Re: OT Wood for the winter

#5

Re: OT Wood for the winter

Paul Zerjay

>A cord is 4'x4'x8'. If his pile is 4'x16"x24',that's a cord.

Re: OT Wood for the winter

#6

Dick Hines

Re: OT Wood for the winter

Dick Hines

>Nice wood pile Roger. I once heard that you could tell a mans wealth by the size of the wood pile he had in his back yard.

Me? I just flip a switch and the gas logs fire right up.

Re: OT Wood for the winter

#7

Re: OT Wood for the winter

Emmett Manley, Lakeland, TN------WebKitFormBoundar

>This woodpile is almost exactly a cord.

Watch out for people selling a "face cord" which is usually 4'x4'x(something less than 2', often 16-18"). A face cord comes out to be less than one-half of the 128 cubic feet required for a cord.