Re: Ed Moore
Dennis Yoder
>Are we going to have to start buying bandaids for you and Mike? Heal well. Dennis & Christine Y
Knowledge You Can Build On — Est. 1998
Re: Ed Moore
Dennis Yoder
>Are we going to have to start buying bandaids for you and Mike? Heal well. Dennis & Christine Y
Bandsaw extension?
Ellis Walentine
>Hey, Ken, was that a metal-cutting saw you rebuilt? I used to have a W-T 16" woodcutting bandsaw that had about 11" resaw capacity. After I lost that one in my shop fire, I picked up a W-T 16" multiple-speed metal cutting saw but it only has 8" capacity. I thought of sawing the post apart and fashioning some kind of weldment in there to extend the height. Frank Klausz has the same saw and he raised his upper section an inch or two, but I want to get 12" if I can. Is this what you did? Inquiring minds want to know. Photos would be nice too.
Ellis Walentine, Host
Words of wisdom
Ellis Walentine
>Thanks, Ed, for your words of wisdom after your accident. Any time we can help others avoid a similar fate, we've done a lot for the community as a whole.
On another note, nicked tendons do heal. I can vouch for that. But they take a long time and lots of stretching and soaking before they recover completely. You have my best wishes for the speediest recovery.
Ellis
Hope you have a speedy recovery
Mike Hunter
>
AFTER THE CAST COMES OFF BE SURE
Rich Pearson in Mill Creek, WA
>to faithfully INSIST on a course of Physical Therapy and faithfully do the PT.
I had a similar accident last year and was "between" medical insurance coverages. That meant that PT was out of the question.
The result is my left index finger will no longer fully bend making a fist. I can grasp a 1.25 inch closet rod comfortably but any smaller and the finger will not co-operate and it still hurts.
I'm back to turning but I am constantly reminded of my inattention!
Best of wishes on your full recovery.
THANKS to EVERYONE!
Ed Moore in SW VA
>
Re: Ed Moore
Bruce McElhaney, Spring Lake, Michigan
>I fear (respect) the bandsaw more than any other tool. My wife is a manager of the Operating wing at our local hospital. She recently told me that one of the surgeons there cut off three of his fingers in a bandsaw accident. Unfortunately that will almost certainly end his surgical career. Hope you get well soon Ed.
OUCH! That REALLY hurts!
Ed Moore in SW VA
>That brings my cut into perspective!
Yesterday I got another poignant jolt of reality. A sweet lady in our Sunday School class who never bothered anyone learned this week that she has a brain tumor. A biopsy is scheduled.
I do not underestimate what could have happened, but I now see my cut as an "inconvenience".
Ed
Re: Sad, but true.
Emmett Manley, Lakeland, TN
>Thanks for upping my scare level. I have avoided serious chainsaw and bandsaw accidents for 40 years by running scared. I had become a little complacent lately, but if Ed Moore can have an accident, I sure can.
Best wishes for a speedy and complete recovery. You have two months to heal before your John C. Campbell course.
Emmett, the JCCFS course may ...
Ed Moore in SW VA
>benefit from this event. I need to take it a little easy for a couple or three weeks so I plan to spend time writing up notes for the course. I'll make examples and take pictures when I am a little more agile with the right hand. I learned yesterday at the doctor's office that I did sever one tendon and nicked the other. There are two tendons where the cut occurred.
As I mentioned in another post, after hearing of the surgeon in Michigan who cut off three fingers in a bandsaw and a sweet lady in our Sunday School class who was diagnosed with a brain tumor, I have decided that my cut is an "inconvenience" by comparison.
I plan to focus on the ornaments class at John C Campbell Folk School in November and will try and make it as good a class as possible. There are enough students to make it go, but there is room for more. I'm really glad that you will be in the class.
Please stay scared of the bandsaw, not terrified, but scared enough to respect it and focus on what you are doing when making a cut.
Ed