Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Ed Moore

Posts

Ed Moore

#1

Ed Moore

Roger

>I heard through the grapevine, that Ed moore had a bandsaw accident. Anyone know of his status? Hope he is OK.

Re: Ed Moore

#2

Sad, but true.

Ed Moore in SW VA

>I was pushing to get some stock ready for an important demo Saturday. I wasn't focused on the cut and it slipped, letting my right index finger engage the blade right below the large knuckle on the top. The right hand is in a cast/splint almost up to the elbow.

The good news is that there was a hand specialist available and the ER doctor called him when he saw that the tendon was nicked. I know this man to be an excellent technician, so I have confidence that I have received excellent care. That said, I put a towel over my head and didn't watch him sew me up.

When we got home I immediately called my good friend Peter Shoemaker and told him what happened and that I couldn't do the demo. I apologized for messing up their program.

Anger at my stupidity is my main emotion. And I am thankful that it wasn't worse.

It is said that God watches over fools and drunks, and I don't drink, so there you have it.

NEVER use a machine or power tool unless you are concentrating on what you are doing.

Ed

Re: Ed Moore

#3

Re: Sad, but true.

Sean Troy

>I hope you heal quickly and completly.

Re: Ed Moore

#4

Re: Sad, but true.

David Belser

>Glad to hear you didn't lose a finger and are recovering.

The bandsaw is a deceptively dangerous machine. It's the only one I've screwed up on. Working to fast and caught the back of the middle finger on my right hand and nicked a tendon. I lucked out with stitches and a splint.

- Dave

Re: Ed Moore

#5

Re: Ed Moore

Cyril Griesbach

>I'm sorry to hear about your accident, Ed, but pleased to hear that things will work out well. Heal quickly.

Re: Ed Moore

#6

JL

Hope you have an uneventful and full..

JL

>recovery.

Re: Ed Moore

#7

Re: Sad, but true.

Jim Shaver - Oakville, Ont, Canada

>Ed,

Heavens My Friend, I am so sorry for this news.. and so grateful it was not worse.

I hope you heal quickly,

Take care,

Jim

Re: Ed Moore

#8

Dick Hines

Re: Ed Moore

Dick Hines

>Sorry to hear about your accident Ed. The band saw is the tool that get most people in a wood turning shop.

I have one word of advice to anyone useing a band saw. "PUSH STICK". I keep one on the saw table at all times and never get my hands close to the blade.

Hope you have a speedy recovery.

Re: Ed Moore

#9

hope you get well soon. scary thought

john lucas

>

Re: Ed Moore

#10

Re: Ed Moore

Don Orr

>Sorry to hear that Ed. Glad it wasn't worse and hope you heal up well.

Re: Ed Moore

#12

Re: Heal fast Ed

Ken

>DANG,that is a real bummer,I sure hope you have a full speedt recovery and I fully agrre,don't turn on the mach with your mind somewhere else.Been there done it.Twice on a tablesaw.

I don't mean to hijack you thread,but I just rebuilt a Walker Turner BS and and had raised it from 8" to 13" well over where the switch is,is where the blade travels,YUP,one day I reached for the switch and hit the blade and only the good lord only knows why I didn't loose a body part,not even a knick,well it took mr about 30 min to fashion a new blade gaurd for it.Again sorry for the hijack,but just wanted to point out how one little bit of carelessnes can posably be a disaster.So like said folks PLEASE work safely.

Re: Ed Moore

#13

Re: Heal well my friend!

Jamie Donaldson

>

Re: Ed Moore

#14

Steven Antonucci

Most important thing:10 in, 10 out

steve antonucci

>Never underestimate the ability of shop equipment to ruin your day. I try to listen to the little voices in my head when they start telling me it's a bad idea. They are always right.

Heal up.

Steve

Re: Ed Moore

#15

Re: Most important thing:10 in, 10 out

Jerry Hall

>Ed, Thanks for the info, and my best wishes for a good recovery. In my many years in the shop the two of three consequential injuries have been on the band saw. One time I grabbed a piece carelessly before the blade was at "Stop, stop" and the other with a dull blade after a long day of rounding blanks, and the blank (which was poorly supported at the base) instantly bound up, tilted and smashed my finger to near hamburger. My third incident was with a non power tool, a very sharp bench chisel. Not too bad for 55 years in the shop, but lessons none the less that hopefully will make me sufficiently mindful each day. Our work is dangerous, and our confidence grows until these reminders come along. Jerry

Re: Ed Moore

#16

Re: Ed Moore

Doug Thompson near Cleveland

>Ouch! Take care of yourself and in no time you'll be good to go.

Re: Ed Moore

#17

Ed Moore

Bill Crommett

>Ed: Welcome to the dishonorable club TWIDDTSM (Those With Impaired Digits Due To Shop Machines )

Re: Ed Moore

#18

Ouch!

Jorge Castaneda~Downeast Maine

>Prompt recovery Ed.

j

Re: Ed Moore

#19

Mike Stafford

Mr. Moore....

Mike Stafford

>I have already expressed my well wishes for a speedy recovery.

I am glad that you were not hurt more seriously. Be careful out there.

Tell Carolyn she has to cut your steak into small pieces...8)

Re: Ed Moore

#20

Re: Sad, but true.

Carole Valentine

>Ouch! Hope you heal fully, Ed. The bandsaw scares me almost as much as my TS...only because it SEEMS so innocuous. I have to keep reminding myself that anything that will cut through a 10" thick piece of wood will just as easily cut through an arm, not to mention a finger!

Re: Ed Moore

#21

Re: Sad, but true.

Bill Grumbine - Kutztown PA

>Ed, sorry to hear of this, and I hope you are healed up soon!

Re: Ed Moore

#22

Re: Sad, but true.

WayneLeach - NW Ont

>Ed,

Sorry to hear about your misfortune. Makes me "wince" thinking about it. I know I get careless with the saw at times but lucky so far.

Get well soon.

Wayne

Re: Ed Moore

#23

Re: Ed Moore

Bill Noce Northeast Ohio

>Ed,

Hope you heal fast and get back to turning Ornaments.

Re: Ed Moore

#24

Hope you heal quickly Ed.

keith zimmerman, Normal, IL

>

Re: Ed Moore

#25

Hmmm! I never thought of it exactly that way!

Charlie Anderson

>