Brass and silver laminates
Brian George
>I'm somewhat new here, but what grade of brass, silver, and others, and mill thickness would I use in pen and pepper mill blanks?
Also, I assume that CA would be the glue of choice.
Knowledge You Can Build On — Est. 1998
Brass and silver laminates
Brian George
>I'm somewhat new here, but what grade of brass, silver, and others, and mill thickness would I use in pen and pepper mill blanks?
Also, I assume that CA would be the glue of choice.
Re: Brass and silver laminates
Ed Davidson
>A lot of people use pieces of aluminum cut from soda cans, roughed up with #220 sand paper and glued together with medium thick CA.
Re: Brass and silver laminates
Brian George
>Thanks for the input on the aluminum. I'm going to give it a try. I would assume that brass and silver/nickel of similar mill thickness would work as well. Thanks, again.