Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Rhodesian teak?

Posts

Rhodesian teak?

#1

Steve Kubien

Rhodesian teak?

Steve Kubien

>Anyone ever work with the stuff? I've been give a 2x10-4ft piece by a customer who wants 2 pens in exchange for the rest of the board. The (minimal) reading I've done says it is hard, abrasion resistant, hard on tools due to high silica and that frequent grinder-trips are in my future.

I want to just danish oil these pens and polish the bejeezus out of them. My thinking is that over time they will develop a really nice, dark glow. Any flaws with that line of thought?

Thanks for your help.

Steve Kubien

Re: Rhodesian teak?

#2

Re: Rhodesian teak?

Harry in Beautiful Downtown Kulpsville

>Steve, I've turned teak once. As you noted it is quite abrasive. I could make three passes down the outside of a small bowl and the tool would need resharpening. I put a round nose, carbide router bit in a Jacobs chuck and used that to rough out the bowl. It sanded to a nice finish. If I recall correctly, it was buffed with the Beal system but no finish other than wax was applied. My son uses it for his change and keys. The finish still looks good.

Re: Rhodesian teak?

#3

Re: Rhodesian teak?

john lucas

>Steve I'm made quite a few Teak Mirrors but I don't know if it's Rhodesian Teak. Probably not. It turns well but cuts like a very hard wood. I don't remember having to sharpen more often I just couldn't take big bites. It polishes up really well. So much so that I thought about not using any finish. Hope your wood responds like this because it's kind of nice.

Re: Rhodesian teak?

#4

Ellis Walentine

All teak is abrasive

Ellis Walentine

>You just have to sharpen more often. At least it isn't also super dense like ipe. Now that stuff really ruins tools.

Ellis

Re: Rhodesian teak?

#5

Re: Rhodesian teak?

Ed Wujciak

>I've turned a few pieces of teak (origin unknown). Ditto everything everyone above says. I've had trouble finishing because it's pretty oily. My teak source recommends water-based poly but I didn't like the results - or the process. BLO worked OK but the bowl just looked kinda dull... No snap to it at all. Play around and if you make a finishing breakthrough, lemme know. Good luck.

Re: Rhodesian teak?

#6

Re: Rhodesian teak?

Mike Brazeau

>A few years ago, one of our guild members got access to pallet containers of African Teak offcuts from a company that makes custom hotel and office furniture. I have used for Christmas ornament spindles etc. Very hard and fine grained, but comes up to a great finish. Don't recall it being oily at all. Varying shades of brown with black streaks.

Re: Rhodesian teak?

#7

Re: Use dust protection

Steve in NC

>I have not turned teak but I worked it plenty during my wooden sailboat building days. AS others said, teak will dull tools quickly but it finishes very nice.

I developed a sensitivity to the dust after a very short time working with it so I would suggest being careful with the dust. Also, wiping surfaces with acetone prior to gluing helps remove the oil and help adhesion

Re: Rhodesian teak?

#8

Re: Rhodesian teak? *LINK*

Clay Foster

>Rhodesian teak is not a true teak, but has many of the same qualities. It is very dense, brittle, splintery, and abrasive, but polishes up to a beautiful finish. It should make beautiful pens.

A couple of years ago I brought back from South Africa a bunch of railroad ties and boards milled from ties that were mostly Rhodesian teak, with some Lebombo iron wood. This desk was made from Rhodesian teak, also utilizing a Dogon grainery door.


img

Rhodesian teak

Re: Rhodesian teak?

#9

Steve Kubien

Thanks everyone

Steve Kubien

>Sounds like any other teak I have worked with. Glad it was free because I haven't enjoyed working with what I have used. Hopefully this time will be different.

Steve

Re: Rhodesian teak?

#10

Re: Thanks everyone

Tony - Memphis

>I just finished a garden bench in teak and I'll NEVER work it again! It even dulled the tools in my shop that were close to it! I've never used anything that ate up my edges so bad. It is really pretty though. Easy to work, suprisingly. I even carved 4 volutes on my bench and it carved well. I oiled it with teak oil and the color and grain was really nice. I paid for mine and it was very expensive and combined with the tool eating, I could have bought a nice bench, but oh well. I enjoyed making it and I like the outcome. I still have a lot of cutoffs that I'll do something with someday.

Tony