Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Lathe history/help

Posts

Re: Lathe history/help

#26

Sliding not so new

Thad

>My 1939 J.A.Fay & Egan model 400 headstock slides the length of the bed.

It does not swivel though.

~ Thad

Middle GA

Re: Lathe history/help

#27

Re: Lathe history/help

Ace Foster in Port Orchard

>It may be beyond your scope, but I have often reflected that when a friend gave me an old Craftsman lathe back in the early 70's, I was able to find exactly two books that seemed helpful (F. Pain and Peter Child). Pretty much the only way to learn was to stand there and make mistakes. With luck, you might be able to find somebody to give you a few pointers.

These days,there are about a bazillion good books, GOK how many videos, turning clubs all over the place, in-person lessons readily available, and, of course, the internet/world-wide web, that permits us to meet here and pose such questions.

What a great time to be a beginning turner!

Re: Lathe history/help

#28

Re: Lathe history/help

Dick Coers

>I started turning 22 years ago, so just about qualify for your time line. One of the bigger improvements the manufacturers have made, is to get the speed slow enough for bowl work. Some manufacturers still don't get it, but I think there are even some pulley machines that get under 500 rpm. My first lathe was a reeves drive, variable speed Delta. It was a package deal, carbon steel chisels, a really rotten expanding chuck that would continue to expand when I got a catch (blowing off the bottom recess), and that machine with a wire basket above the bed to catch those wayward bowls. The noise and vibration from that reeves drive was a nightmare.

I agree that the biggest improvement to turning, in general, was the sharing of information. Before the internet, I used either Beta or VHS video tapes. But the biggest leap of education for me was a regional symposium in St. Louis.

Re: Lathe history/help

#29

Re: Lathe history/help

John Jordan

>Again, Thanks to all. This article is about the machine, not what/why we make, or how we learn. I assume others will be writing on those topics for the book. While I agree the concept of the machine is still the same,and many features may have been part of industrial/pateernmaking sorts of lathes, the ACTUAL machines widely available to us are light years from where there were 25 years ago in their capabilities and ease of use. I know I wouldn't want to go back to an 11" Delta Homecraft lathe.

I'm working in NC for a few days, so if I'm absent from my own thread, I'll be back.......................

John

Re: Lathe history/help

#30

Re: Lathe history/help

john lucas

>Adjustable legs. Not all lathes have that yet but adjustable legs are the best thing to come along. Turners average between 5 feet to 6 1/2 feet tall. One size fits all never did work.

Re: Lathe history/help

#31

Re: Lathe history/help

Brent English

>Some of the posters are correct to point out there is historical precedence for things like sliding beds, sliding headstocks, motor heads, etc., but keep in mind, these were specialty low-volume tools for the machine trade and not widely used by woodturners.

History is not just the dates of the first instance of technology, but also includes the story of the adoption of that technology and the effect it has on the population. For instance, there were a small handfull of steam powered �cars� in the late 1700�s, but it wasn�t until the early 1900�s that the automobile really started to have an effect on people.

So with that in mind, I�ll offer that lasers and hollow forms have both been around for many years, but only in the last few years, with the adoption of cheap low-powered lasers and the various hollowing rigs, have many hobbyists added hollow forms to their repertoire. Before that it seems, only the most daring, like Ellsworth and John Jordan, took on these skill-intensive and high-risk works.

Are there other examples like that? What about piercing tools, air-brushes, carving tools, software for segmented work, etc. Just look at instant galleries now compared to 10 years ago. How have the turnings changed, and what has made them change. Good DVD�s and the internet have already been mentioned. Let�s not forget the advent of the AAW itself.

Brent at Robust Tools

Re: Lathe history/help

#32

Re: Lathe history/help

Pete in Holland, MI

>Hummmm John -

Kinda appears that the frequency drive has been the biggest change to the lathe, other than some small subtle things. The rest of the hobby has morfeddue to a big improvment in tools & techniques.

Kinda interesting the pretty much the same basic machine of 100 years ago has been coaxed to make a broader field of products. The car is pretty much the same way. What was developed in the Model-T era set the groundwork for what we have today. Most of the basic principles are still there, only improved upon.

Like the story I heard recently about a teenager talking to an old man:

Teen: We have cell phones, CD players, computers, television, Ipods, jet transportation, internet, and many other things these days. Must of been tough in your younger years?

Old man: Yea, it was, so we had to invent them.

Re: Lathe history/help

#33

Re: Lathe history/help

Barry Irby

>My grandfather overheard a comment about going parking with your girlfriend. He chuckled and said, "A good horse knew his own way."