Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

More on Hollowing Tools/Safety/Injuries

Posts

Re: More on Hollowing Tools/Safety/Injuries

#26

Finally, the words of wisdom. Thanks, Russ.

Eddie Pacheco; Antioch, Ca.

>If you have a shear pin or something then the person gets a piece of that in the eye. Standing by a lathe with a spinning workpiece is dangerous and you have to be alert. You gotta have your 'A' game going. Driving to Woodcraft or some other place to get a turning tool can be equally as dangerous.

Re: More on Hollowing Tools/Safety/Injuries

#27

Dick Hines

Re: More on Hollowing Tools/Safety/Injuries

Dick Hines

>Barbara, as I have said before "If you are stupid you are supposed to suffer."

The lables that are put on everything tells me one thing. Some nut case has done it before and the lable is there to keep other nut cases from doing it again.

Re: More on Hollowing Tools/Safety/Injuries

#28

labeling doesn't work

john lucas

>Dick I hate to disagree with you but they put labels that say this will kill you on cigarettes. You can't believe how many college kids smoke. They should probably have a label on all the Doughnuts I eat that says if you eat this you'll have to ride your bike 30 miles this afternoon.

Re: More on Hollowing Tools/Safety/Injuries

#29

Dick Hines

Re: labeling doesn't work

Dick Hines

>You are right John, the lables don't work. They are there to keep people from sueing the companies. Of course that will not stop peoplefrom sueing. If there is a lable saying "don't use this tool in an unsafe way" then it should be up to the owner of said tool to not use the tool in an "unsafe way."

You can't teach stupid.

Re: More on Hollowing Tools/Safety/Injuries

#30

Dick Hines

Re: labeling doesn't work

Dick Hines

>You are right John, the lables don't work. They are there to keep people from sueing the companies. Of course that will not stop people from sueing. If there is a lable saying "don't use this tool in an unsafe way" then it should be up to the owner of said tool to not use the tool in an "unsafe way."

You can't teach stupid.

Re: More on Hollowing Tools/Safety/Injuries

#31

Rob Wallace

Re: labeling doesn't work

Rob Wallace

>Dick wrote:

"You cant teach stupid."

..... actually, over the past 20 years, I think I actually may have done this a few times....

...he usually sits in the back row of the classroom, and reads the student daily paper throughout the entire lecture....

...and typically rounds-out the bottom of "the curve".

Rob Wallace

Re: More on Hollowing Tools/Safety/Injuries

#32

Hey Rob!

GalenV in Iowa

>My two kids are not stupid, you will find them setting about mid row and texting! They think a newspaper is old technology.

Galen

Re: More on Hollowing Tools/Safety/Injuries

#33

Dick Hines

Re: labeling doesn't work

Dick Hines

>Rod,I was useing "stupid" in the general term.

Re: More on Hollowing Tools/Safety/Injuries

#34

Inane labelling

Alex Yeilding

>Someone in the food industry told me of a product with a label that read "Heat in saucepan over medium heat for 15 minutes before serving." Because of actual calls from customers (they didn't blame this one on the lawyers), they changed the labeling to read "Open can and empty contents into a saucepan, then heat over medium heat for 15 minutes before serving."

Scary!

Re: More on Hollowing Tools/Safety/Injuries

#35

Re: Inane labelling

john lucas

>Alex My hiking and photo buddy from years ago was always on the go. He would open a can of beans and throw them in the oven, then take a shower, when he was done they would be nice and warm. He forgot to open the can once and while he was getting dressed heard an explosion. Had a lot of cleaning to do after that.

Re: More on Hollowing Tools/Safety/Injuries

#36

Exploding cans

David Walser

>When she came home from high school, my sister was in the habit of putting a can of root beer into the freezer to cool. One day she forgot all about the can of pop until the next morning, so she put the frozen can into the oven to warm for a before school snack. She then, of course, forgot about the can and went to school. The resulting explosion blew the door off the oven and covered the entire kitchen with a fine spray of root beer. Fortunately, no one was in the kitchen at the time.

My sister says she's never seen my mother as mad as she was when she walked into my sister's history class, grabbed her by the ear, and dragged her out to the car. Not a word of explanation was given until they arrived home and walked into the kitchen. Then, my sister remembered her can of pop. What was left of the can was in the middle of the kitchen floor.

Fun times (for older brothers)!

Re: More on Hollowing Tools/Safety/Injuries

#37

Steven Antonucci

So you say you want to blow something up, huh?

steve antonucci

>When we were in school, we had a party at my fraternity that involved blowing things up in the microwave. The last thing we planned to do was a coconut, and its a good thing it was last.

Apparently, coconuts are really grenades you can eat. It took a long time in our little old microwave, so we punched in an hour. I think we got about 15 minutes before the door came off (we didn't find it until the next day). All viewed from our dance floor on video- none of us were dumb enough to go near it...

Steve

Re: More on Hollowing Tools/Safety/Injuries

#38

Re: So you say you want to blow something up, huh?

David Walser

>Steve,

You win.

David

Re: More on Hollowing Tools/Safety/Injuries

#39

Re: More on Hollowing Tools/Safety/Injuries

Frank C Joseph

>Woodwork by its nature is a hazardous line if work. The Table saw is bad the Lathe is bad and the ban saw is very bad. If you are going to do woodwork safety begins and ends with YOU. Not some label that you won't read anyway. In this world it seams people want to blame some one for every thing. If YOU don't want to accept the RESPONSABILITY for what you do don't do it.

Re: More on Hollowing Tools/Safety/Injuries

#40

Steve Kubien

Lemme guess...

Steve Kubien

>...a few engineers were in the frat weren't they? I have engineer friends who frequently like to tell tales of jousting...with lit fireworks! Not a bright bunch but somehow they survived (proof that maybe Darwin was wrong).

Steve

Re: More on Hollowing Tools/Safety/Injuries

#41

Re: Inane labelling

Bill Crommett

>------and this was changed to accommodate people who also vote.

Re: More on Hollowing Tools/Safety/Injuries

#42

Steven Antonucci

Um, actually, nothing but engineers....

steve antonucci

>and I wasn't even one of the smart ones...

S

Re: More on Hollowing Tools/Safety/Injuries

#43

Steve Kubien

Re: Um, actually, nothing but engineers....

Steve Kubien

>As I thought. How did you do in the annual jousting tournament?

All kidding aside, there is something different in the mental make-up and decision-making processess in engineers. Perhaps you folks can see risk and define it more clearly than the rest of us. Of course, perhaps you just have golden horse-shoes rammed in certain orfices for luck?

All the best,

Steve Kubien

Re: More on Hollowing Tools/Safety/Injuries

#44

New safety label in the works...

Stuart Johnson

>Last night's news had a piece that featured a lady that is trying to get a bill passed that will require cell phones to have a notice:

"texting while driving is dangerous".

I'm sure that warning would stop me from texting. Well it would if I knew how to text, knew anyone I could text and not had my text messaging blocked by my carrier to stop odd ten cent charges from popping up.

Re: More on Hollowing Tools/Safety/Injuries

#45

She'll text the new law to you.

john lucas

>