Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Sanding Discs

Posts

Re: Sanding Discs

#26

Re: I think I've tried them all...

john lucas

>I hand sand with the Norton 3X. Best paper I have found so far. I will have to try the discs.

Re: Sanding Discs

#27

Don Pencil

Re: I think I've tried them all...

Don Pencil

>I'm going with Carol and "Sanding Glove" on this one.

Re: Sanding Discs

#28

Re: I think I've tried them all...

Dave L

>Ms. Carole: A question---which of the discs are you mentioning? The blue ones? Or one of the others?

Re: Sanding Discs

#29

Re: Sanding Discs - Norton 3X or A975

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Bruce, I am just curious about your comments on bringing out Norton 3X disks in August. They will be excellent, no doubt, as the 3X has a wonderful reputation. However, they are made from heat treated aluminum oxide, as are the A275 disks that you already sell. Did you meant Norton A975, which are ceramic, and the equivalent of the 3M Cubitron -- except that it has velcro backing instead of psa?

Re: Sanding Discs

#30

Re: I think I've tried them all...

keith zimmerman, Normal IL

>I also hand sand with the Norton 3X, but use Vince's blue disks for powersanding. I just bought some of the Norton 3X disks in 600, 800, and 1200 grits out in Albuquerque. I'm looking forward to trying them out.

keithz

Re: Sanding Discs

#31

Re: I think I've tried them all...

Carole Valentine

>I'm using the Norton A275 (I think that's the number). They are not blue,but a reddish brown.

Re: Sanding Discs

#32

Re: I think I've tried them all...

Dave L

>Thank you.

Re: Sanding Discs

#33

Re: Sanding Discs - Norton 3X or A975

Bruce Hoover

>Bill,

I'll do my best to answer your question.

The NORTON 3X discs and the A975 are one in the same. Both terms are used by NORTON, and they are made from NORTON SG ceramic aluminum oxide abrasive. This is a patented process and the SG stands for seeded gel, a process by which the grain is "grown". This is different from the process used by 3M to make the 900DZ Cubitron ceramic. A full time production turner has tested both using his usual process and states that the 3X discs are substantially longer lasting than the 275 and any other disc he's tried as well. However, the 900DZ still gets the first place ribbon for longevity. The 3X are much more flexible,and come with a "loop" backing compatible with any velcro type disc holder. They also come in higher grits than the 900DZ does.

Having said all this, I have calls into my abrasive guru's at both companies and as I learn more, I'll share the knowledge.

Bottom line: the 900DZ is unbeatable for aggressive cutting and longevity. The 3x won't last quite as long, but offers more flexibility, and a wider grit range. The A275 is the next step down with superior flexibility, consistent finish, and very good life, outperforming any other comparable product.


img

Re: Sanding Discs

#34

Re: Sanding Discs - Norton 3X or A975

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Bruce, I am glad to hear this. I have used all three and agree with your conclusions. I finish about 250 bowls a year (about 18 inch diameter average) and have been testing all three sandpapers over the last two yrars or more. I am happy with all three. In my experience, the 3M Cubitron disks do last longer, but not by much. I like the fact that the Norton 3X has a velcro backing and that I can get it up to 400 grit from my present supplier. At the moment I can only get 6 inch disks in the 3X, so (being lazy) I suspect I will be buying a ton of the 3 inch 3X from you. I do not know of anyone else cutting the Norton 3X into 3 and 2 inch disks, so, I suspect this will bring you a lot of new business. It is well deserved, as you have brought us many wonderful products.